锻压技术

基于径向基函数近似模型的板料自由折弯成形回弹预测

英文标题：Springback prediction of sheet metal free bending based on

作者：韩江窦龙龙夏链张魁榜

单位：合肥工业大学

分类号：TG386

出版年,卷(期):页码：2019,44(6):30-34

摘要：

为实现对钣材V形自由折弯的有效控制，首先建立了V形自由折弯卸载前上模下压量模型，并基于此理论模型在有限元分析软件ABAQUS中运用显示和隐式相结合的方法，对板材V形自由折弯成形与回弹过程进行有限元仿真。然后以板料回弹量为试验指标，以板料厚度、板料弹性模量、上模圆角半径和下模开口宽度为影响因子，每个影响因子取5个水平数，设计了正交试验。根据正交试验方案及结果，建立自由折弯板料成形回弹的径向基函数近似模型。通过仿真试验与实际折弯试验对模型进行了验证，回弹预测角度误差为±0.8°，验证了方法的可行性，为下一步应用于自主研发的折弯机数控系统提供支持。

In order to realize the effective control of the V-shaped free bending of sheet metal, firstly, the press amount model of
upper die before the V-shaped free bending unloading was established, and the processes of forming and springback of the V-shaped free bending for sheet metal were simulated by the finite element analysis software ABAQUS combining explicit and implicit methods. Then, the springback of sheet metal was taken as the test index, and the thickness of sheet metal, the elastic modulus of sheet metal, the radius of upper die roundness and the width of lower die opening were taken as the influence factors. Furthermore, the orthogonal experiment was designed by taking five levels of each influence factor. Based on the orthogonal experimental scheme and results, the approximate model of radial basis function for springback of free bending sheet metal was established and verified by actual bending experiment with error of springback prediction angle of ±0.8°. Thus, the feasibility of the method was verified, which provided support for the further application of CNC system of self-developed bending machine.

基金项目：

安徽省科技攻关重大项目（17030901039）

韩江（1963-），男，博士，教授，博士生导师 E-mail：hanjiang626@126.com

参考文献：

［1］王飞, 游有鹏. 钣金V形折弯成形的回弹控制研究
［J］. 材料科学与工艺, 2012, 20(2): 35-38.

Wang F, You Y P. Study on springback control of V-bending process of metal sheet
［J］. Materal Science & Technology, 2012, 20(2): 35-38.

［2］王广凯, 成思源, 李苏洋,等. 基于FEM的板料回弹预测与补偿研究进展
［J］. 机床与液压, 2013, (5): 167-173.

Wang G K, Cheng S Y, Li S Y, et al. Research development of sheet springback prediction and compensation based on FEM
［J］. Machine Tool & Hydraulics, 2013, (5): 167-173.

［3］欧阳代武, 刘明学, 石伟. 钣金V形折弯回弹分析与研究
［J］. 船电技术, 2017, 37(10): 46-48.

Ouyang D W, Liu M X, Shi W. Analysis and research on springback in sheet metal V-bending
［J］. Marine Electric & Electronic Engineering. 2017, 37(10): 46-48.

［4］安治国. 径向基函数模型在板料成形工艺多目标优化设计中的应用
［D］. 重庆：重庆大学, 2009.

An Z G. Application of Radial Basis Function Metamodel for Optimization of Sheet Metal Forming
［D］. Chongqing: Chongqing University, 2009.

［5］吴宗敏. 散乱数据拟合的模型、方法和理论
［M］. 北京：科学出版社，2016.

Wu Z M. Models, Methods and Theories for Fitting Scattered Data
［M］. Beijing: Science Press, 2016.

［6］陈文，傅卓佳，魏星. 科学与工程计算中的径向基函数方法
［M］. 第一版. 北京：科学出版社，2014.

Chen W, Fu Z J, Wei X. Radial Basis Function Method in Science and Engineering Computation
［M］. The First Edition. Beijing: Science Press, 2014.

［7］Jin R, Chen W, Simpson T W. Comparative studies of metamodeling techniques under multiple modeling criteria
［J］. Structural Optimization, 2001, 23(1): 1-13.

［8］穆雪峰. 多学科设计优化代理模型技术的研究和应用
［D］. 南京：南京航空航天大学, 2004.

Mu X F. Research and Application of Multidisciplinary Design Optimization Surrogate Model Technology
［D］. Nanjing: Nanjing University of Aeronautics and Astronautics, 2004.

［9］徐绩青, 李正良, 吴林键. 基于径向基函数逼近的结构动力响应计算方法
［J］. 应用数学和力学, 2014, 35(5): 533-541.

Xu J Q, Li Z L, Wu L J. Structural dynamic response calculation method based on radial basis function approximation
［J］. Applied Mathematics and Mechanics. 2014, 35(5): 533-541.

［10］齐威. ABAQUS6.14超级学习手册
［M］. 第一版. 北京：人民邮电出版社，2016.

Qi W. ABAQUS6.14 Super Learning Manual
［M］. The First Edition. Beijing: Posts & Telecom Press, 2016.

［11］肖景容，姜奎华. 冲压工艺学
［M］. 第一版. 北京：机械工业出版社，1994.

Xiao J R, Jiang K H. Stamping Technology
［M］. The First Edition. Beijing: China Machine Press, 1994.

［12］DIN 6935—2010, Cold bending of flat rolled steel
［S］.

［13］张彤. 钣金自由折弯下压量理论分析与实验研究
［D］. 武汉：华中科技大学, 2014.

Zhang T. Metal Sheet Air Bending Model and Experiment Research
［D］. Wuhan: Huazhong University of Science and Technology, 2014.

［14］孙腾. 一种径向基代理模型在汽车轮辐翻孔成形中的应用
［J］. 机电工程技术, 2017, 46(5): 25-28.

Sun T. Rbf surrogate model applied in hole forming for the car spoke
［J］. Mechanical & Electrical Engineering Technology, 2017, 46(5): 25-28.

［15］李云雁, 胡传荣. 试验设计与数据处理
［M］. 第三版. 北京：化学工业出版社，2017.

Li Y Y, Hu C R. Experiment Design and Data Processing
［M］. The Third Edition. Beijing: Chemical Industry Press, 2017.

［16］Mcdonald D B, Grantham W J, Tabor W L, et al. Global and local optimization using radial basis function response surface models
［J］. Applied Mathematical Modeling, 2007, 31(10): 2095-2110.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】