网站首页期刊简介编委会过刊目录投稿指南广告合作征订与发行联系我们English
某同步器齿环热精锻成形工艺方案设计
英文标题:Process scheme design on hot precision forging for a synchronizer ring
作者:梁强 
单位:重庆工商大学 
关键词:同步器齿环 热精锻成形 折叠缺陷 金属汇流 数值模拟 
分类号:TG316
出版年,卷(期):页码:2019,44(1):17-21
摘要:

提出同步器齿环两种不同的热精锻成形工艺方案,借助有限元分析软件Deform3D,模拟了两种工艺方案下齿环的热精锻成形过程,分析比较了两种方案中的金属流动规律和应变分布规律。模拟结果显示:工艺方案1的成形末期,在定位键与侧壁结合处变形较剧烈,该处存在两个方向的金属汇流,从而导致该处产生折叠缺陷;采用方案2,定位键最后充填,充填方式为金属的径向和轴向复合流动,定位键与侧壁的结合处不存在两个方向上的金属汇流,因此不会产生折叠缺陷。工艺试验表明,采用方案1成形的齿环在定位键与侧壁的结合处有明显的折叠缺陷,采用方案2成形的齿环充填饱满、未见折叠缺陷。数值模拟结果与工艺试验结果相吻合,数值模拟可以为实际生产提供指导。

The forming process schemes of two kinds of hot precision forging for synchronizer ring were proposed, and their forming processes were simulated by the finite element software Deform3D. Then, the metal flow and strain distribution laws of two process schemes were compared. The simulation results show that at the end of forming process for the first process scheme, the deformation at the joint between positioning key and side wall is severe, and the metal confluence in two directions results in folding defect. However, for the second scheme, the positioning key is filled by a radial and axial composite flow at the final stage, and the metal confluence in two directions does not exist at the joint between positioning key and side wall. Finally, no folding defect is generated. The process experiments show that the synchronizer ring has obvious folding defect at the joint between positioning key and side wall by the first process scheme, and the synchronizer ring is filled sufficiently without folding defect by the second process scheme. Furthermore, the simulation results are consistent with the experiment results, and the numerical simulation can provide guidance for the actual production.

基金项目:
重庆市基础科学与前沿技术研究专项基金资助项目(cstc2017jcyjAX0175);重庆工商大学高层次人才启动项目(1856002);重庆工商大学校内科研项目(1752009)
作者简介:
梁强(1988-),男,博士,讲师,E-mail:woliangniliu@163.com
参考文献:

[1]夏知姿. 基于微观行为研究的锰黄铜薄壁环型锻件工艺优化[D]. 重庆:重庆大学, 2015.


Xia Z Z. Process Optimization about Thinwall Ring Forging of Manganese Brass Based on Microstructure Behaviors [D]. ChongqingChongqing University, 2015.


[2]Cui H Y, Tian N, Li R C, et al. A method of parametric design of automobile synchronizer ring based on UG secondary development tools [J]. Applied Mechanics & Materials, 2014, 716-717: 635-638.


[3]Zhang M, Hua L, Song Y L, et al. Effects of parameters on fine blanking of steel synchronizer ring teeth [J]. Advanced Materials Research, 2014, 941-944: 1671-1677.


[4]徐荣贵, 肖铁忠, 肖章林. 基于RSMPSO结合的同步器齿环热精锻工艺参数优化[J]. 锻压技术, 2017, 42(11): 12-17.


Xu R G, Xiao T Z, Xiao Z L. Optimization on process parameters of hot precision forging for synchronizer ring based on RSM and PSO [J]. Forging & Stamping Technology, 2017, 42(11): 12-27.


[5]肖章林, 肖铁忠, 徐荣贵. 基于粒子群算法的齿环精锻成形工艺参数优化[J]. 锻压技术, 2017, 42(2):17-21.


Xiao Z LXiao T ZXu R G.Optimal design of process parameters of hot precision forging for synchronizer ring based on particle swarm optimization [J]. Forging & Stamping Technology, 2017, 42(2): 17-21.


[6]鞠丽, 李文新. 同步器钢齿环精锻工艺研究[J].热加工工艺, 2017, 46(15): 165-167.


Ju LLi W X. Study on precision forging process of steel synchronizer gear rings [J]. Hot Working Technology, 2017, 46 (15): 165-167.


[7]邵长伟, 周杰, 王梦寒, . 基于有限元法的精密锻造齿环齿顶折叠的研究[J]. 热加工工艺, 2010, 39(11): 97-99.


Shao C W, Zhou J, Wang M Het al. Analysis on folding of gear top in synchronizer ring precision forging based on FEM [J]. Hot Working Technology, 2010, 39(11)97-99.


[8]王梦寒, 邵长伟, 徐志敏,. 同步器齿环模锻金属流动规律分析及工艺改进[J]. 热加工工艺, 2010, 39(13): 19-22.


Wang M H, Shao C W, Xu Z M, et al. Analysis of metal flow and technology improvement on synchronizer ring precision dieforging[J]. Hot Working Technology,2010, 39(13)19-22.


[9]任小鸿, 梅静, 陈丽, . 汽车同步器齿环锻压工艺的改进[J]. 模具工业, 2016, 42 (11): 64-67.


Ren X H, Mei J, Chen L, et al. Improvement on forging process of automobile synchronizer gear ring [J]. Die & Mould Industry, 2016, 42(11): 64-67.


[10]胡建军, 李小平. Deform3D 塑性成形CAE应用教程[M]. 北京: 北京大学出版社, 2011.


Hu J J, Li X P. CAE Application Tutorials of Plastic Forming Based on Deform3D[M]. Beijing: Peking University Press, 2011.


[11]赵德颖, 张连东, 朱恩领,. 枝杈类锻件挤压过程折叠缺陷形成研究[J]. 塑性工程学报, 2017, 24(2): 10-16.


Zhao D Y, Zhang L D, Zhu E L, et al. Folding defect formation of branchtype forgings during extrusion [J]. Journal of Plasticity Engineering, 2017, 24(2): 10-16.

服务与反馈:
本网站尚未开通全文下载服务】【加入收藏
《锻压技术》编辑部版权所有

中国机械工业联合会主管 北京机电研究所有限公司 中国机械工程学会塑性工程分会主办
联系地址:北京市海淀区学清路18号 邮编:100083
电话:+86-010-82415085 传真:+86-010-62920652
E-mail: fst@263.net(稿件) dyjsjournal@163.com(广告)
京ICP备07007000号-9