锻压技术

7075铝合金的等温自由锻造温度优化

英文标题：Optimization on isothermal open-die forging temperature for aluminum alloy 7075

作者：高生祥邓丽霞张文祥

分类号：TG146.4

出版年,卷(期):页码：2018,43(8):8-12

摘要：

为优化7075铝合金的性能，采用不同的锻造温度进行了7075铝合金等温自由锻造试验，并研究了锻造温度对7075铝合金的拉伸性能、冲击性能和耐磨损性能的影响。试验结果表明：锻造温度过低，7075铝合金内部很难动态再结晶，晶粒粗大，组织不均匀，不利于合金拉伸、冲击和耐磨损性能的提高；随着锻造温度的上升，7075铝合金内部的动态再结晶加强，晶粒逐渐变小、细化，组织分布也逐步均匀，合金的拉伸、冲击和耐磨损性能得到提高；当锻造温度达到420 ℃时，动态再结晶达到最强化，7075铝合金内部晶粒几乎都得到细化，且大小均匀，组织得到最大程度改善，合金的拉伸、冲击和耐磨损性能得到极大改善；当温度超过420 ℃时，随着温度进一步上升，7075铝合金的晶粒不再发生动态再结晶，晶粒不再细化，反而呈现出变粗大的迹象，组织不再均匀、致密，合金的拉伸、冲击和耐磨损性能呈现下降趋势。因此，7075铝合金的锻造温度优选为420 ℃。

In order to optimize the performance of aluminum alloy 7075, the isothermal open-die forging test of aluminum alloy 7075 was implemented under different forging temperatures, and the influences of forging temperature on tensile property, impact property and wear resistance were analyzed. The experimental results show that when the forging temperature is too low, the dynamic recrystallization hardly occurs inside aluminum alloy 7075, and the existed uneven microstructure with large grain size is not conducive to the improvement of tensile property and impact property as well as wear resistance. However, with the increase of forging temperature, the dynamic recrystallization inside aluminum alloy 7075 is improved, the grain size is smaller and refined to realize uniform distribution, and the tensile property and impact property as well as wear resistance are improved. When the forging temperature reaches 420 ℃, the dynamic recrystallization is up to the strongest, the alloy grains are almost completely refined with uniform distribution, the microstructure is improved to the maximum extent, and the tensile property and impact property as well as wear resistance are improved greatly. Furthermore, when the temperature exceeds 420 ℃, the dynamic recrystallization of aluminum alloy 7075 no longer occurs, the grain is no longer refined and becomes coarse, and the microstructure becomes uneven and no compact, which leads to the decrease trend of tensile property, impact property and wear resistance. So, the optimized forging temperature of aluminum alloy 7075 is 420 ℃.

基金项目：

2016 年浙江省教育厅科研项目（Y201636055）

高生祥（1978-），男，硕士，副教授 E-mail：307437234@qq.com

参考文献：

［1］朱文婧. 铝合金汽车轮毂发展及其生产工艺
［J］.军民两用技术与产品, 2016, (24):123.

Zhu W J. Development and production process of wheel hub made of aluminum alloy
［J］. Dual Use Technologies & Products, 2016, (24):123.

［2］董立新, 周友龙, 何贤贵, 等. 提高7A04铝合金强度的工艺研究
［J］. 热加工工艺, 2011, 40(12):186-187.

Dong L X, Zhou Y L, He X G, et al. Investigation on process for improving strength of 7A04 Al alloy
［J］. Hot Working Technology, 2011, 40(12):186-187.

［3］万俊, 陈丁垚, 沈培辉, 等.7075铝合金锻件淬火过程分析
［J］. 机械制造与自动化, 2015, 44(2):71-75.

Wan J, Chen D Y, Shen P H, et al. Quenching process analysis of 7075 aluminium alloy forgings
［J］. Machine Building & Automation, 2015, 44(2):71-75.

［4］曾茂燕. 钒在铝合金高强汽车板中的应用研究
［J］. 钢铁钒钛, 2017, 38(4):58-62.

Zeng M Y. Alloy elements optimization of high strength Al alloy plate for automobile
［J］. Iron Steel Vanadium Titanum, 2017, 38(4):58-62.

［5］李鑫, 何东野, 王艳菊, 等.AA6082铝合金等温辊锻—模锻新工艺
［J］. 新技术新工艺, 2014, (8):1-3.

Li X, He D Y, Wang Y J, et al. New process of isothermal rolling and stamp forging of AA6082 aluminum alloy
［J］. New Technology & New Process, 2014, (8):1-3.

［6］葛德, 吴淑芳, 宋永吉, 等. 铝合金筒形机匣等温锻造模设计
［J］. 模具制造, 2015, 15(5):61-65.

Ge D, Wu S F, Song Y J, et al. Design of isothermal forging die for the aluminium-alloy cylindrical housing
［J］. Die & Mould Manufacture, 2015, 15(5):61-65.

［7］汪军. 汽车用铝合金冲压成形性能研究
［J］.热加工工艺, 2015, 44(17):123-125.

Wang J. Study of stamping formability of aluminum alloy for automobile
［J］. Hot Working Technology, 2015, 44(17):123-125.

［8］郭鸿镇, 姚泽坤, 虢迎光, 等. 等温精密锻造技术的研究进展
［J］. 中国有色金属学报, 2010, 20(s1):593-599.

Guo H Z, Yao Z K, Guo Y G, et al. Research progress of isothermal precision forging technology
［J］. The Chinese Journal of Nonferrous Metals, 2010, 20(s1):593-599.

［9］赵新海，徐洪强，刘丹丹，等.铝合金直齿锥齿轮等温锻造数值模拟及参数优化
［J］. 锻压技术，2016，41（7）：142-146.

Zhao X H，Xu H Q，Liu D D，et al. Numerical simulation and parameter optimization on aluminum alloy spur bevel gear in isothermal forging
［J］. Forging & Stamping Technology，2016，41（7）：142-146.

［10］王兵, 孟凡起, 张龙飞, 等. TC4叶栅环等温锻造成形工艺研究
［J］. 航空制造技术, 2015, (17):117-119,126.

Wang B, Meng F Q, Zhang L F, et al. Study on forming process of isothermal forging of TC4 blade
［J］. Aeronautical Manufacturing Technology, 2015, (17):117-119,126.

［11］刘奇，李保永，郭晓琳，等. 5A06铝合金复杂盒形件等温锻造工艺研究
［J］. 锻压技术，2017，42（6）：16-20.

Liu Q，Li B Y，Guo X L，et al. Study on isothermal forging process for complex box-shaped parts of aluminum alloy 5A06
［J］. Forging & Stamping Technology，2017，42（6）：16-20.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】