锻压技术

变速拉深影响B340/590DP板料成形性能的机理分析

英文标题：Mechanism analysis on influence of variable speed deep drawing on formability of B340/590DP sheet metal

作者：付秀娟周振余月红李建军

分类号：TG386

出版年,卷(期):页码：2018,43(4):131-137

摘要：

为了研究冲压成形中变速拉深影响板料成形性能的机理，分别建立了拉深过程中的虚功率方程和有限元分析模型。研究结果表明，主变形区的等效应力、等效应变速率、板料和模具之间的摩擦以及法向应力是影响拉深成形性能的主要因素，而变速拉深通过降低主变形区的等效应力、等效应变速率和板料与模具间的摩擦，影响板料的拉深成形性能。进一步通过拉深实验，对比了不同成形速度下的成形状态和成形零件质量，验证了理论分析和有限元模拟的正确性。成形过程中合理的变速能够降低总变形功，从而提高板料的拉深成形性能。变速机理分析为变速成形的应用提供了理论基础。

In order to study the mechanism of influence of variable speed deep drawing on the formability of sheet metal in the stamping process, a virtual power equation and finite element analysis model in the deep drawing process were established. The results show that the equivalent stress, equivalent strain rate, friction between sheet and die and normal stress in the main deformation zone are main factors influencing the deep drawing formability. However, the variable speed deep drawing affects the formability of sheet metal by decreasing the equivalent stress, equivalent strain rate and friction between sheet and die in the main deformation zone. Comparing the forming state and forming quality of parts at different forming speeds, the theory analysis and finite element simulation were verified by deep drawing experiment. Thus, the reasonable variable speed in forming process can reduce the total deformation power so as to improve the deep drawing formability of sheet metal, and the mechanism analysis on variable speed provides a theoretical basis for the application of variable speed forming.

基金项目：

国家自然科学基金资助项目(51575406)；材料成形与模具技术国家重点实验室开放课题研究基金（P2016-16）；研究生教育创新基金（CX2016015）

付秀娟（1974-），女，博士，副教授；E-mail：fuxiujuan2008@163.com

参考文献：

[1]Abe Y, Ohmi T, Mori K , et al. Improvement of formability in deep drawing of ultra-high strength steel sheets by coating of die[J]. Journal of Materials Processing Technology, 2014, 214(9): 1838-1843.

[2]Yue Z M, Badreddine H, Dang T, et al. Formability prediction of AL7020 with experimental and numerical failure criteria[J]. Journal of Materials Processing Technology, 2015, 218: 80-88.

[3]Chan W L, Fu M W. Experimental studies of plastic deformation behaviors in microheading process[J]. Journal of Materials Processing Technology, 2012, 212 (7): 1501-1512.

[4]王敏，张春，肖海峰，等. 高强钢热冲压成形破裂行为的变形速率效应[J]. 锻压技术，2017,42(1): 23-26.

Wang M, Zhang C, Xiao H F, et al. Influences of deformation velocity on fracture behavior of high strength steel in hot stamping forming[J].Forging & Stamping Technology，2017,42(1): 23-26.

[5]Manabe K， Koyama H， Katoh K, et al. Intelligent design architecture for process control of deep-drawing[A]. Proceedings of the Second International Conference on Intelligent Processing and Manufacturing of Materials[C]. Honolulu, HI, USA, 1999.

[6]Manabe K, Koyama H, Yoshihara S, et al. Development of a combination punch speed and blank-holder fuzzy control system for the deep-drawing process[J]. Journal of Materials Processing Technology, 2002, s125-126(36): 440-445.

[7]Nobuhiro K, Masayoshi A, Kunlachart J. Deep-drawing and ironing of 1050 aluminum sheets loaded with vibration using NC servo press machine[J]. Journal of Japan Institute of Light Metals, 2007, 57(6): 240-244.

[8]莫健华, 郑加坤, 古閑伸裕, 等. 伺服压力机的发展现状及其应用[J]. 锻压装备与制造技术, 2007, 42(5): 19-22.

Mo J H, Zheng J K, Koga N, et al. The developing status and application of the servo press[J]. China Metalforming Equipment & Manufacturing Technology, 2007, 42(5): 19-22.

[9]Kaya S, Altan T. Warm forming aluminum and magnesium, Part I: Forming a round cup[J]. Stamping Journal, 2005, 17(12): 36.

[10]Kaya S. An experimental study on nonisothermal deep drawing process using aluminum and magnesium alloys[J]. Journal of Manufacturing Science and Engineering, 2008, 130(12):1-11.

[11]付秀娟. 变速/变载条件下板料冲压成形性能及其变形机理研究[D]. 武汉: 华中科技大学, 2012.

Fu X J. Study on Formability and Forming Mechanism of Sheet Metals in Variable Forming Speed/Forming Loading Stamping Process[D]. Wuhan: Huazhong University of Science & Technology, 2012.

[12]吴青松.温度和应变率对低合金钢力学行为的影响[D]. 哈尔滨: 哈尔滨工程大学, 2005.

Wu Q S. Effect of Temperature and Strain Rate on Mechanical Behavior of Low Alloy Steel[D]. Harbin: Harbin Institute of Technology, 2005.

[13]赵亚溥. 裂纹动态起始问题的研究进展[J]. 力学进展, 1996, 26(3): 362-376.

Zhao Y P. The advances of studies on the dynamic initiation of cracks[J]. Advances in Mechanics,1996, 26(3): 362-376.

[14]李春雷. 2A12铝合金本构关系实验研究[D]. 哈尔滨: 哈尔滨工业大学, 2006.

Li C L. Experimental Investigation into the Constitutive Relationship of 2A12 Aluminum Alloy[D]. Harbin: Harbin Institute of Technology, 2006.

[15]石亦平,周玉蓉. ABAQUS有限元分析实例详解[M]. 北京: 机械工业出版社, 2010.

Shi Y P, Zhou Y R. Detailed Analysis of ABAQUS Finite Element Analysis[M]. Beijing：China Machine Press, 2010.

[16]刘倩，李建军，付秀娟, 等. 板料成形过程中成形速度对B340/590DP摩擦性能的影响[J]. 锻压技术, 2012, 37(5): 27-31.

Liu Q, Li J J, Fu X J, et al. Influence of forming speed on friction property of B340/590DP in sheet metal forming[J]. Forging & Stamping Technology, 2012, 37(5): 27-31.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】