|
翻边装置在尾门总成夹具中的应用与研究
|
|
英文标题：Application and research on flanging device in the tailgate assembly fixture |
|
作者：何鹏申 刘春雨 李辉 阮林凡 黄涛 |
|
单位：安徽江淮汽车股份有限公司 |
|
关键词：翻边装置 气缸 导杆 夹具 翻边刀块 |
|
分类号：TG73 |
|
出版年,卷(期):页码：2018,43(3):112-115 |
|
摘要：
|
|
首先介绍了翻边装置在某汽车尾门总成夹具上的应用，通过在尾门总成夹具上增设带切换翻边装置,满足了尾门总成数模中无法通过包边模一次性包边区域的压合要求，通过夹具上的夹紧定位销对尾门总成进行孔定位，再通过夹钳部位的型面夹紧装置对型面进行夹紧及定位，确保翻边精度与外观质量要求。重点讲述了带切换翻边装置的夹具结构及工作原理，通过气缸、导杆、旋转轴、翻边刀块等的结构设计，实现了该特殊包边需求。实际生产证明，该翻边装置能有效地应用在尾门总成夹具上，满足了生产中对压合区域的翻边精度与外观质量要求，降低了车型工装的开发成本,并且实现了翻边压合，提高了生产效率。
|
|
The of application flanging device in automobile tailgate assembly fixture was introduced, and pressing requirement in edging area, which could not be once finished by edging die in tailgate assembly model, was met by adding flanging device with a switch to tailgate assembly fixture. Then, the hole of the panel was positioned by positioning pin in fixture, and the profiles were clamped and positioned by clamping device located in the surface of clamping position to ensure the accuracy and appearance quality requirements. Furthermore, the structure and working principle of fixture with flanging device were mainly described, and the special hemming needs were realized by the structure design of cylinder, guide rod, rotation axis and flanging knife block. Practical production proves that the flanging device can be effectively used in tailgate assembly fixture, and the flanging accuracy and appearance quality requirements in pressing area are met. Thus, the development cost is reduced, the flanging pressing requirement is realized, and the production efficiency is improved.
|
|
基金项目：
|
|
国家科技重大专项（2014ZX04002041）
|
|
作者简介：
|
|
何鹏申（1987-），男，学士，工程师
E-mail：Pshe0000@yeah.net
〖HT〗〖TS)〗
|
|
参考文献：
|
1］ 李雪，程迎潮，刘罡，等.轿车侧围外板冲压成形分析
［J］.锻压技术,2011,36(3):27-33.
Li X，Chen Y C, Liu G, et al. Sheet metal stamping analysis of automobile side-panel
［J］. Forging & Stamping Technology, 2011, 36(3):27-33.
［2］ 崔令江.汽车覆盖件冲压成形技术
［M］. 北京：机械工业出版社，2003.
Cui L J. Technology of Automobile Panel Stamping Forming
［M］. Beijing: China Machine Press, 2003.
［3］ 安徽江淮汽车股份有限公司.一种模具及其包边翻边机构
［P］.中国：201510319914.9, 2016-09-06.
Anhui Jianghuai Automobile Co., Ltd. A mold and its package edge flanging
［P］. China: 201510319914.9, 2016-09-06.
［4］ 王孝培.实用冲压技术手册
［M］. 北京：机械工业出版社，2001.
Wang X P. Practical Handbook of Stamping Technology
［M］. Beijing: China Machine Press, 2001.
［5］ 郑微,刘春雨. 冲孔装置在侧围外板夹具中的应用与研究
［J］. 锻压技术，2016,41(4)：74-77.[LL]
Zheng W，Liu C Y. Application and research of piercing device in the side frame outer panel fixture
［J］. Forging & Stamping Technology, 2016, 41(4):74-77.
［6］ 邬华辉，孙跃东，周萍.汽车外覆盖件包边尺寸要求及表面质量分析
［J］.工业自动化，2012,34(13):32-36.
Wu H H, Sun Y D, Zhou P. The dimension of exterior auto hemming components and analysis of surface defect
［J］. Manufacturing Automation, 2012, 34(13):32-36.
［7］ 郑晖，孟祥韬，张嘉，等.基于实例的典型汽车覆盖件模具设计
［J］.锻压技术，2011，36(3)：98-103.
Zheng H，Meng X T，Zhang J, et al. Based die design of typical automobile body panel
［J］. Forging & Stamping Technology，2011,36(3):98-103.
［8］ 刘春雨,郑薇. 保险杠安装支架级进模具的应用与研究
［J］.锻压技术，2017,42(5):91-95.
Liu C Y, Zheng W. Application and research on progressive dies for bumper mounting bracket
［J］. Forging & Stamping Technology, 2017, 42(5):91-95.
［9］ 宋杨湾, 徐祥和, 赵亦希,等. 包边宽度的计算方法研究
［J］. 塑性工程学报, 2017, 24(5):125-131.
Song Y W, Xu X H, Zhao Y X, et al. Package edge width calculation method for the study
［J］. Journal of Plasticity Engineering, 2017, 24(5):125-131.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
