锻压技术

基于Dynaform的印涂铝盖冲压拉深摩擦条件的数字化设计技术

英文标题：Digital design on friction condition of printing and coating aluminium covers in the deep drawing process based on Dynaform

作者：鲜小红

单位：四川大学四川职业技术学院

关键词：印涂铝盖冲压拉深 Dynaform 摩擦条件数值模拟

分类号：TG386.3+2

出版年,卷(期):页码：2017,42(3):170-174

摘要：

以非线性有限元软件 Dynaform 为平台，保持凸模与坯料间的摩擦系数不变，分别将凹模与坯料间的摩擦系数取值为0.01，0.02，0.04，0.08和0.1，研究凹模与坯料间的摩擦系数对1716印涂铝盖冲压拉深过程中壁厚分布的影响；再将凹模与坯料间的摩擦系数保持不变，分别将凸模与坯料间的摩擦系数取值为0.1，0.125，0.15，0.17和0.18，研究凸模与坯料间的摩擦系数对1716印涂铝盖冲压拉深过程中壁厚分布的影响。结果表明：1716印涂铝盖末次拉深的相对合理摩擦条件是凸模与坯料间静摩擦系数取0.17，凹模与坯料间动摩擦系数取0.020。同时，生产试验表明，采用静摩擦系数为0.17、动摩擦系数为0.020的摩擦条件可以生产出质量合格的产品。

Based on nonlinear finite element software Dynaform and the unchanged friction coefficient between punch and blank, the influences of friction coefficient between die and blank on the wall thickness distribution of printing and coating aluminium covers 1716 were studied with the different friction coefficients 0.01, 0.02, 0.04, 0.08, 0.1 respectively. Then, the unchanged friction coefficient between die and blank, the influences of friction coefficient between punch and blank on the wall thickness distribution of printing and coating aluminium covers 1716 were studied with the different friction coefficients 0.1, 0.125, 0.15, 0.17, 0.18 respectively. The results show that in the last drawing process the relatively reasonable static friction coefficient between punch and blank is 0.170, and dynamic friction coefficient between die and blank is 0.020.

基金项目：

四川省教育厅自然科学重点科研项目（15ZA0347）

鲜小红（1967-），男，学士，副教授

参考文献：

［1］刘建超,张宝忠.冲压模具设计与制造[M].北京:高等教育出版社,2010.Liu J C, Zhang B Z. Stamping Die Design and Manufacture[M].Beijing: Higher Education Press, 2010.
［2］胡兆国，曹素兵.基于Dynaform的叉车轮毂冲压工艺方案改进设计研究[J].锻压技术, 2015,40(6):160-164.Hu Z G, Cao S B. Study on improving the design of forklift wheel hub stamping based on Dynaform[J].Forging ＆ Stamping Technology, 2015, 40 (6): 160-164.
［3］王筱冬. 工艺参数对拉深件壁厚变化的影响研究[J]. 榆林学院学报, 2015, 25(2):8-11.

Wang X D. Effect of process parameters on the wall thickness of components in drawing process[J].Journal of Yulin University，2015,25（2）:8-11.
［4］崔柏伟.冲压CAE技术应用[M].大连:大连理工大学出版社,2014.Cui B W. Application of Staming CAE Technology[M].Dalian: Dalian University of Technology Press,2014.
［5］王秀风,郎利辉.板料成形CAE设计及应用[M].北京:北京航空航天大学出版社,2010.Wang X F, Lang L H. CAE Design and Application of Sheet Metal Forming [M].Beijing: Beijing University of Aeronautics and Astronautics Press, 2010.
［6］付世强. 电解铝液直接铸轧生产瓶盖用8011-H16铝合金板工艺研究[J]. 轻合金加工技术, 2014, 42(8):33-37.Fu S Q. Study on castrolling production process of 8011-H16 aluminum sheets for bottle caps with electrolytic aluminum liquid[J].Light Alloy Fabrication Technology, 2014, 42(8):33-37.
［7］丁宏波. 高性能瓶盖用热轧AA8011-H16铝合金带材的生产工艺研究[J]. 铝加工, 2012，(3):29-33.Ding H B. Production process of hot rolled AA8011-H16 aluminum alloy strips for high performance bottle lids[J].Aluminum Fabrication, 2012，(3):29-33.
［8］乔及森, 聂书才, 张涵,等. 铝镁包覆挤压材料界面微观组织与力学性能研究[J]. 稀有金属, 2015，39(6):481-486.Qiao J S, Nie S C, Zhang H, et al. Microstructure and mechanical properties of interfaces of extruded cladding mgal rods[J]. Chinese Journal of Rare Metals, 2015,39(6):481-486.
［9］李维钺, 李军. 中外金属材料牌号和化学成分对照手册[M]. 北京：机械工业出版社, 2011.Li W Y, Li J. Handbook of Chinese and Foreign Brand and Chemical Composition for Metal Materials[M]. Beijing: China Machine Press, 2011.
［10］邓富敏. 筒形件拉深时壁厚变化规律的研究[D]. 武汉：武汉理工大学, 2014.Deng F M. Research on Thickness Variation of Cylindrical Parts in Deep Drawing Processing[D]. Wuhan: Wuhan University of Technology, 2014.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】