锻压技术

轴向冲头和移动推块共同进给成形三通管新工艺

英文标题：New process of T-pipe forming by moving block and punch axial feed

作者：何建春肖小亭陈名涛刘志峰

单位：广东工业大学

分类号：TG394

出版年,卷(期):页码：2017,42(3):109-113

摘要：

运用ABAQUS显式算法模拟仿真轴向位移变量和内压变量对成形支管的高度、最大和最小壁厚的影响，分析壁厚分布情况，探究支管补料原理。模拟仿真结果表明：在一定位移变量和内压变量范围内，大位移量和高内压对增加支管高度的贡献率分别为330%和84.2%，对最大壁厚值的影响分别为39.4%和13.5%，对最小壁厚值的影响分别为5.1%和33.8%；双侧移动型成形工艺的支管壁厚呈现出两侧对称的4个峰值和3个谷值分布规律；移动推块和轴向挤压冲头的补料原理是将两端的管料推挤送进到支管根部实现补料过程。

The influences of axial displacement variables and internal pressure variables on the branch height, the maximum and minimum wall thickness of T-pipe were numerically simulated by ABAQUS explicit algorithm. Then, the wall thickness distribution was analyzed, and the branch feeding principle was explored. The simulation results show that the contribution rate of long displacement and high internal pressure to the increase of branch height is 330% and 84.2% respectively, the influence on the maximum wall thickness is 39.4% and 13.5% respectively, and the influence on the minimum wall thickness is 5.1% and 33.8% respectively. Furthermore, the branch wall thickness shows that both sides are symmetrical with four peaks and three valleys. The material feeding principle of moving block and axial extrusion punch is that twoend material is pushed into the branch root area to realize the material feeding process.

基金项目：

国家自然科学基金资助项目（U0934006）

何建春 (1990-)，男，硕士研究生肖小亭（1957-），男，博士，教授，博士生导师

参考文献：

［1］Sato K, Hiramatsu K, Hiroshige I, et al. Tube hydroforming technology with controllable moving dies[A]. Japanese Spring Conference for the Technology of Plasticity[C].Japan, 2006.
［2］Manabu W, Masaaki M, Keinosuke I, et al. Large-expansion hydroforming technology achieving three-times expanding[J]. Procedia Engineering，2014，81：2217-2222.
［3］Zadeh H K, Mashhadi M M. Finite element simulation and experiment in tube hydroforming of unequal T shapes[J]. Journal of Materials Processing Technology, 2006, 177(1-3):684-687.
［4］苑世剑, 王小松. 内高压成形机理研究及其应用[J]. 机械工程学报, 2002, 38(S1):12-15.Yuan S J，Wang X S. Developments in researches and applications of tube hydroforming[J].Chinese Journal of Mechanical Engineering, 2002, 38(S1):12-15.
［5］温华典，肖小亭，陈颖，等.对三通管支管成形高度影响因素的探讨[J].材料科学与工艺，2010,18 (Z1): 12-18.Wen H D, Xiao X T, Chen Y, et al. The influencing factors of branch height in T-shaped tube hydroforming[J]. Materials Science and Technology, 2010,18 (Z1):12-18.
［6］章凯，肖小亭，温华典，等.轴向加速度对单侧双排四通管内高压成形规律的影响[J].机床与液压，2012,40（21）:26-28.Zhang K, Xiao X T, Wen H D, et al. Influence of axial acceleration on hydroforming rule for unilateral fourway tube[J]. Machine Tool & Hydraulics, 2012,40（21）:26-28.
［7］刘静，黄卫良，李霄，等.单双层U形不锈钢波纹管液压胀形变形特征对比研究[J]. 锻压技术，2016，41（5）：24-28.Liu J，Huang W L，Li X，et al. Comparative study on deformation behavior of single and bilayered Ushaped stainless steel bellows in hydroforming [J]. Forging & Stamping Technology，2016，41（5）：24-28.
［8］朱明清，吉卫喜，张旭，等.钛T型管液压成形的工艺参数研究[J]. 锻压技术，2015，40（1）：56-60.Zhu M Q，Ji W X，Zhang X，et al. Research on technological parameters of hydroforming for titanium Tshaped tube[J]. Forging & Stamping Technology，2015，40（1）：56-60.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】