锻压技术

盒形件拉深侧壁卷曲的工艺控制方法

英文标题：A process-control method of sidewall curl during the rectangular box drawing

作者：周驰陈来来张赛军颜武军

单位：华南理工大学

分类号：TG386.3

出版年,卷(期):页码：2016,41(3):13-17

摘要：

盒形件拉深的侧壁卷曲是一种普遍的回弹现象，需要进行有效控制或者补偿。侧壁卷曲是由于材料在流经凹模圆角区域后其内外表面的应力差所形成的反向弯矩造成的。将盒形件分为转角区域、过渡区域、直边区域和底部区域，并提出了盒形件拉深的反向弯矩简化模型，将直边部分简化为U形件，转角区域反向弯矩视为零，二者中间存在一个线性的过渡区域。在此基础上，分析了直边区域侧壁材料成形应力变化历史，提出并实现了控制盒形件侧壁卷曲的浮动拉延筋工艺。实验结果表明：浮动拉延筋能有效控制盒形件拉深过程中的侧壁卷曲现象，其完全起作用时，可使侧壁卷曲量减少86.1%。

Sidewall curl of rectangular box is a common springback issue, and it needs to be effectively controlled or compensated. When material flowed through the die radius region, the stress difference of the inner and outer surfaces generated a reverse bending moment and caused springback. Therefore, the rectangular box was divided into corner region, transition region, straight edge region and bottom region, and the simplified model of reverse bending moment is proposed for rectangular box drawing. In this model, the behavior of straight edge region was simplified as U-shaped drawing-bending, while the reverse bending moment of corner region was assumed as zero, and a linear transition region existed in them. Based on the model, the stress changing process of sidewall material in straight edge region was analyzed, and a floating draw-bead process was proposed and implemented to control the sidewall curl of rectangular box. The experimental results show that the floating draw-bead can control sidewall curl effectively, and the sidewall curl value reduces by 86.1% when it throughly works.

基金项目：

2014年东莞市产学研合作项目（2014509109204）;2013年省部产学研专项资金技术攻关项目（2013B090600014）

周驰（1973-），男，博士，副教授

参考文献：

［1］吴磊，李光耀，蒋浩民，等. 基于胀弯成形的高强度钢板回弹特性实验与分析[J].塑性工程学报, 2009, 16(2): 33-38.Wu L, Li G Y, Jiang H M, et al. Study on springback characters of HSS steelsbased on stretch-bending forming[J]. Journal of Plasticity Engineering, 2009, 16(2): 33-38.
［2］周驰，颜武军，李云飞. 冲压件侧壁卷曲的机理及其控制[J].塑性工程学报,2014，21（2）:60-64.Zhou C， Yan W J， Li Y F. Mechanism and controlling of side-wall curl in sheet metal forming[J].Journal of Plasticity Engineering, 2014,21（2）:60-64.
［3］Liu G, Lin Z, Xu W, et al. Variable blankholder force in U-shaped part forming for eliminating springback error[J]. J. Mater. Process Technol.,2002，120:259-264.
［4］王健，胡星，刘丽娜，等. 基于变压边力技术的微车大梁回弹研究和控制[J].锻压技术，2008,33（5）：55-59.Wang J, Hu X, Liu L N, et al. Springback research and control about mini-car beam based on variable blankholder force technology[J]. Forming & Stamping Technology, 2008,33(5):55-59.
［5］Ayres R A. Shapeset: A process to reduce sidewall curl springback in highstrength rails[J]. Applied Metalworking, 1984，2(3):127-134.
［6］鄂大辛，水野高尔. 矩形盒拉深中的应力分析及拉深力的近似计算[J].塑性工程学报，2006,10（5）：76-78.E D X, Takaji M. Stress analysis and approximate calculation of drawing force in the rectangular drawing[J]. Journal of Plasticity Engineering, 2006,10 （5）：76-78.
［7］文涛，鄂大辛. 矩形拉深件材料流动变形规律的有限元分析[J].现代工程制造，2004,(4)：40-42.Wen T, E D X. Application of FEM on the study of material flowing deformation rule in the process of rectangular case drawing[J]. Moder Manufucturing Engineering，2004,(4)：40-42.
［8］鄂大辛，水野高尔. 矩形盒拉深成形中的几何形状效应[J].锻压技术，2004,29(3)：30-32.E D X, Takaji M. Geometric shape effect of rectangular case drawing forming[J]. Forming & Stamping Technology, 2004,29(3)：30-32.
［9］鄂大辛, 庞愉平. 非回转对称拉深中法兰材料变形规律的研究[J]. 机械工程, 2005, 15(5): 462-464.E D X,Pang Y P. On the law of material deforming of flange in a non-ratational symmetry drawing[J].China Mechanical Engineering, 2005, 15(5): 462-464.
［10］马丽霞，王凤琴，赵军，等. 盒形件主要变形区的应力近似理论解析[J].中国机械工程学报，2005,41（7）：56-61.Ma L X, Wang F Q, Zhao J, et al. Approximate analysis of stress in main deformation area for a rectangular box[J]. Journal of Mechanical Engineering, 2005,41（7）：56-61.
［11］Hu Jack,Zdzislaw Marciniak,John Duncan. Mech-anics of Sheet Metal Forming[M]. UK:Butterworth-Heinem-ann, 2002.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】