锻压技术

辊缝摩擦因数对轧机垂直振动的影响

英文标题：Influences of roll gap friction coefficient on rolling mill vertical vibration

作者：徐忠兰梁胜龙

单位：苏州工业职业技术学院

关键词：轧机垂振乳化液摩擦因数

分类号：TG333

出版年,卷(期):页码：2015,40(12):67-70

摘要：

以轧机系统的垂振现象为研究对象，结合近年来轧机垂振问题的研究成果分析得出，轧机垂振主要原因之一是由于轧速的提高导致辊缝摩擦因数发生改变，形成轧机垂振条件从而产生垂振。轧制乳化液的各项性能参数与辊缝间的摩擦因数有着直接关系，其为非线性关系，并且各项性能参数之间也相互影响。故运用BP神经网络的方法寻求两者之间的非线性关系，并依据此关系和轧制情况，通过适当调节乳化液各性能参数得到合适的辊缝摩擦因数，从而保证轧机稳定运行。

For the vertical vibration phenomenon of rolling, combining the recent achievements of mill vertical vibration, the main reason of mill vertical vibration was analyzed, namely, the increase of rolling speed led to the change of roll gap friction coefficient which caused mill vertical vibration. There was a direct relationship between performance parameters of rolling emulsion and roll gap friction coefficient, wihich was non-linear, and the performance parameters interacted with each other. Therefore, the non-linear relationship was searched by BP neural network, and based on this relationship and rolling situation, the performance parameters of emulsion were appropriately adjusted to obtain the suitable roll gap friction coefficient in order to ensure stable operation of the mill.

基金项目：

江苏高校品牌专业建设工程资助项目（PPZY2015 B186）

作者简介：徐忠兰（1970-），女，硕士，副教授

参考文献：

［1］赵丽娟, 高丹. 国内外冷轧机垂直振动问题研究进展[J]. 机械制造, 2007,519(45):28-32.Zhao L J, Gao D. The vertical vibration research progress of the cold rolling mill at home and abroad[J]. Machinery, 2007, 519(45):28-32.
［2］吴炳胜, 李运强, 吴继民. CSP热连轧机垂直振动建模分析[J]. 锻压技术,2014,39(1):91-94.Wu B S, Li Y Q, Wu J M. Simulation and analysis on the vertical vibration of the CSP hot strip mill[J]. Forging & Stamping Technology, 2014,39(1):91-94.
［3］吴炳胜, 王子龙, 吴继民,等. 轧制润滑对冷轧机振动的影响[J]. 锻压技术,2014,39(8):69-71.Wu B S, Wang Z L, Wu J M, et al. Influence of rolling lubrication on vibration of cold rolling mill[J]. Forging & Stamping Technology, 2014,39(8):69-71.
［4］殷文凯, 王媛媛, 潘红良, 等. 冷轧乳化液铁粉颗粒对摩擦系数的影响[J]. 钢铁研究学报,2013,25(1):26-29.Yin W K, Wang Y Y, Pan H L, et al. Effect of iron particles in lubricants on friction coefficient in cold rolling[J]. Journal of Iron and Steel Research, 2013,25(1):26-29.
［5］白振华, 陈浩,王瑞,等. 乳化液性能对摩擦系数影响机理及工程实用模型的研究[J]. 燕山大学学报, 2014,38（1）:16-21.Bai Z H, Chen H, Wang R, et al. Study of relationship between performance of emulsion and friction coefficient and its practical model in cold tandem mill[J]. Journal of Yanshan University, 2014,38（1）:16-21.
［6］朱瑶. 轧制过程中考虑辊缝摩擦状态的辊缝模型研究[D]. 浙江:杭州电子科技大学,2012.Zhu Y.Study of the Roll Gap Model During Rolling Process Considering Friction State of Roll Gap[D]. Zhejiang: Hangzhou Dianzi University, 2012.
［7］朱凯, 王正林. 精通MATLAB神经网络[M]. 北京:电子工业出版社,2010.Zhu K, Wang Z L. Proficient in MATLAB Neural Network [M]. Beijing: Electronic Industry Press, 2010.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】