锻压技术

汽车发动机盖类制件共用开卷落料模设计与应用

英文标题：Design and application about universal decoil blanking die of automobile engine hood type parts

作者：张国兵陈文琳徐迎强赵烈伟邓岷生刘程

分类号：TG386

出版年,卷(期):页码：2015,40(8):94-97

摘要：

传统的一个冲压件使用一副模具的生产方式，导致模具开发成本及周期增加，生产过程中生产不同的冲压件需要更换相应的模具致使生产效率低下。针对汽车发动机盖内、外板冲压件及开卷落料模结构相似的特点，研发了可实现多车型共用的开卷落料模，分析了该模具的工装设计要点，并将制造加工出的模具工装成功应用于某企业多个项目中。该结构有效地降低了模具开发成本及周期，连续生产无需更换模具，节省了换模时间，进一步提高生产效率。

Traditional production of stamping part that one die can only be used for one part with defects, such as large development costs, long produce cycle, and the change of different dies for various parts leading to low efficiency in production. According to the similar characteristics of decoil blanking die of inner and outer plates of automobile engine hood parts, an universal decoil blanking die structure for multiple car models was designed and manufactured. The design keys of the blanking die were analyzed. The designed and manufactured blanking die was successfully applied to multiple projects in an enterprise. The results show that the blanking die and its structure can effectively reduce development costs and cycle of the die, and realize the continuous production without changing the die, save set-up time and further improve the productivity.

基金项目：

国家科技重大专项（2014ZX04002041）

张国兵（1984-），男，学士，工程师

参考文献：

［1］王平. 先进开卷落料线的工艺规划设计[J]. 锻压技术,2013,38(4):190-192. Wang P. Process planning design of advanced uncoiler blanking line [J]. Forging & Stamping Technology, 2013,38(4):190-192.
［2］吕进. 开卷落料模在汽车冲压生产中的应用[J].模具制造,2015,15(1)：32-35. Lv J. The application of decoil blanking die in automobile stamping [J].Production Die ＆ Mould Manufacture, 2015,15(1): 32-35.
［3］左治江.高强钢板零件落料冲孔连续模具设计[J].锻压技术,2015,40(3):84-88. Zuo Z J. Design of blanking and piercing progressive die for high strength steel parts [J].Forging & Stamping Technology,2015,40(3):84-88.
［4］谭志成.开卷落料模设计[J].模具制造,2013,13(7):8-11. Tan Z C. An open-book blanking die design [J]. Production Die ＆ Mould Manufacture, 2013,13(7): 8-11.
［5］高健，魏宪波，韦兴民, 等.汽车左右后轮罩外板成形性分析及工艺设计[J].现代制造工程，2013,(8)：64-67.Gao J,Wei X B,Wei X M,et al. The car left and right rear wheel cover design formability analysis and process the outer plate[J]. Modern Manufacturing Engineering,2013,(8)：64-67.
［6］许发樾.实用模具设计与制造手册[M].北京：机械工业出版社，1991.Xu F Y. Die Design and Manufacture Application Handbook[M]. Beijing: China Machine Press, 1991.
［7］王秀凤，张永春. 冷冲压模具设计与制造[M].北京：北京航空航天大学出版社，2012.Wang X F, Zhang Y C. Cold Stamping Die Design and Manufacture[M]. Beijing: Beihang University Press, 2012.
［8］里伯提.Programming ASP.NET：中文版[M]. 翟杰，赵立东，张昊，译.北京：电子工业出版社，2009.Jesse Liberty. Programming ASP.NET：Chinese Edition[M].Translated by Zhai J，Zhao L D，Zhang H. Beijing: Electronic Industrial Press, 2009.
［9］Ousa L C, Castro C F, Antonio C A C. Optimal design of V and U bending processes using genetic algorithms[J].Chinese Journal of Mechanical Engineering, 2002,38(8)：45-49.
［10］Chung J S，Hwang S M. Application of a genetic algorithm to process optimal design in non-isothermal metal forming[J].Journal of Materials Processing Technology,1998,80-81：136-143.
［11］Liu Yuqi. Quantitative for springback of unloading and trimming in sheet metal stamping forming[J]. Chinese Journal of Mechanical Engineering ,2013,(16)：116-124.
［12］Zhang Y L, Li Y. Numerical simulation and analysis of solid-liquid two-phase flow in centrifugal pump[J]. Chinese Journal of Mechanical Engineering ,2013, (1)：53-57.
［13］Yao R,Zhu W B,Huang P. Accuracy analysis of stewart platform based on interval analysis method [J]. Chinese Journal of Mechanical Engineering ,2013,(3)：29-34.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】