锻压技术

驱动齿轮冷挤压成形研究

英文标题：Investigation on cold extrusion of drive gear

作者：蔡丹云丁明明陈磊

关键词：驱动齿轮冷挤压数值模拟

分类号：TG376

出版年,卷(期):页码：2015,40(6):55-59

摘要：

分析了驱动齿轮的冷挤压成形工艺特征，确定其成形方式为齿轮与内花键同步挤压成形。利用Ｄｅｆｏｒｍ-３Ｄ有限元分析软件对驱动齿轮挤压成形过程进行数值模拟，分析了毛坯尺寸、凹模入口角对其挤压成形特性的影响。研究结果表明：当毛坯的外径尺寸大于齿顶圆直径尺寸2 mm、毛坯的内径尺寸为花键小径及凹模入口角为50°时，齿轮和内花键的齿形填充效果较好，同步挤压成形力相对较小。采用模拟得到的优化工艺参数进行挤压成形工艺试验，得到了符合成形精度要求的驱动齿轮成形件。

The cold extrusion forming process characteristics of drive gear were analyzed, and the forming method of extrusion the gear and the internal spline at the same time was determined. The extrusion process of driver gear was simulated by the simulation software Deform-3D. The influences of blank diameter and die entrance angle on cold extrusion process of drive gear were obtained. The result shows that when the external diameter of blank is about 2 mm larger than that of the addendum circle, the internal diameter of blank is the minor diameter of the spline, and the die entrance angle is 50°, with good teeth shape of the gear and internal spline and the relatively small forming force. The optimization parameters in simulation are applied in the extrusion process test, so driving gear parts that meet its precision requirement are produced.

基金项目：

浙江省科技厅公益技术研究工业项目（2014c31112）；浙江省教育厅科研项目（Y201329634）；浙江省科技厅公益技术研究工业项目（2014C31092）

蔡丹云（1975-）女，硕士，讲师

参考文献：

［1］李建平，袁保国，车路长，等.内螺旋状零件冷挤压成形过程数值模拟及参数优化[J].锻压技术，2012,37(6):122-125.Li J P,Yuan B G,Che L C,et al. Numerical simulation and parameter optimization for extrusion process of internal helical part[J].Forging & Stamping Technology,2012,37(6):122-125.
［2］王忠雷，赵国群.精密锻造技术的研究现状及发展趋势[J].精密成形工程，2009，1(1)： 32 -38.Wang Z L,Zhao G Q. Recent condition and Developing trends of precise forging technology[J].Journal of Netshape Forming Egineering,2009,1(1):32-38.
［3］孟令先，宋学进，张元国，等.汽车启动齿轮的高效成形方法[J].锻压技术，2005,30(1):13-22.Meng L X,Song X J,Zhang Y G,et al. High efficiency forming method of auto-mobile starter gear[J].Forging & Stamping Technology,2005,30(1):13-22.
［4］韩豫，刘全坤，陈忠家，等.非贯通内齿轮冷挤压成形工艺研究[J].锻压技术，2009,34(6):27-31.Han Y,Liu Q K,Chen Z J,et al. Study on cold extrusion forming process of non-hole-through internal gear[J].Forging & Stamping Technology,2009,34(6):27-31.
［5］林桂霞.渐开线花键冷挤成形工艺分析与模具设计[J].锻压技术，2014,39(1):104-109.Lin G X. Analysis on cold extrusion molding pro- cess and mold design of involute spline[J]. Forging & Stamping Technology,2014,39(1):104-109.
［6］陈晓伟，池成忠，白庆平.圆柱直齿轮精锻成形毛坯体积的工程计算[J].锻压技术，2012,35(5):28-31.Chen X W,Chi C Z,Bai Q P. Engineering Calculation of cylindrical spur gear billet volume in precision forging process[J]. Forging & Stamping Technology,2012,35(5):28-31.
［7］伍太宾.坯料形状尺寸对齿轮冷挤压成形的影响[J].工艺与工艺装备，2012,37(8): 122-125.Wu T B. Effect of blank on the cold extrusion of starting gear[J].Modern Manufacturing Engineering,2012,37(8): 122-125.
［8］李建平，夏祥生，万元元，等.大尺寸内齿轮冷挤压成形工艺研究[J].锻压技术,2013,38(3):7-11.Li J P,Xia X S,Wan Y Y,et al. Technical research on cold extrusion of large size internal gear [J]. Forging & Stamping Technology,2013,38 (3):7-11.
［9］洪慎章.冷挤压实用技术[M]. 北京：机械工业出版社，2005.Hong S Z. Practical Technology of Cold Extrusion[M].Beijing: China Machine Press,2005.
［10］俞德哲,王新云,金俊松，等.空心圆柱斜齿轮正挤压数值模拟研究[J].锻压技术,2013,38(2):147-150.Yu D Z,Wang X Y,Jin J S,et al. Numerical simulation investigation on forward extrusion process of hollow cylindrical helical gear[J]. Forging & Stamping Technology,2013,38(2):147-150.
［11］陈伟，陈晖，李名尧.不同凹模入模角对直齿圆柱齿轮挤压成形的影响[J].铸造技术，2011,32(1):100-103.Chen W,Chen H,Li M Y. Effect of different blank entry angles to mold on the formation of extrusion spur cylinder gear[J]. Foundry Technology,2011,32 (1): 100-103.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】