锻压技术

轿车后横梁冲压回弹问题分析和成形工艺改进

英文标题：Analysis of the stamping springback and improvement of the forming process for back beam of car

作者：赵鹏吕琳邓明陈罡

分类号：TG386

出版年,卷(期):页码：2015,40(6):25-27

摘要：

轿车后横梁型面复杂、拉深深度大且在成形时应力集中严重，导致成形后制件有回弹和型面扭曲等现象。通过对轿车地板外侧后横梁所产生的扭曲和回弹等缺陷进行应力分析，针对原方案出现的翻边回弹补偿量设计不足、未能准确计算压料力、成形工艺未能充分考虑大尺寸、高强度钢板件的成形特点等问题，制定了合理的冲压工艺方案为：下料拉深修边整形翻边冲孔冲孔侧翻。在优化工艺的基础之上，根据梁类冲压成形特点，提出了增加随形压边、拉延筋和薄膜润滑等措施，可以有效改善回弹，提高了成形件质量。

The complicated outline of back beam of car, the large draw depth and serious stress concentration during the stamping forming lead to springback and distortion on the formed part. Aimed at solving problems of insufficient compensation of the flanging-springback, imprecision calculation of blank holder force,lack of consideration on the forming characteristics of steel parts with large size and high strength in the original process, a reasonable stamping process was formulated by the stress analysis during the stamping forming, namely, blankingdrawingtrimmingsizing-flangingpunchingpunching-flanging. On the basis of the above optimized process and the stamping characteristics of the beam, the blank holder, drawbead and thin film lubrication were added, the springback could be reduced, and the quality of parts was improved.

基金项目：

重庆市应用开发类资助项目（cstc2014yykfA60002;cstc2013yykfc60004）

赵鹏（1989-），男，硕士研究生

参考文献：

［1］陈海波.汽车车身梁类零件冲压工艺的优化及其研究[D].重庆：重庆大学，2009.Chen H B .Study and Optimization on Stamping-process of Automotive Rail Panel[D].Chongqing：Chongqing University,2009.
［2］张璐.高强刚回弹预测中材料模型的适用性研究及回弹补偿的自动实现[D].上海：上海交通大学，2012.Zhang L .Effects Material Models on Springback Predictions and Compensations in Stamping Advanced High-Strength Steels(AHSS)[D].Shanghai:Shanghai Jiao Tong University,2012.
［3］郑生虎.高强钢汽车结构件成形数值模拟及其回弹分析[D].长春：吉林大学，2013.Zheng S H .Forming Numerical Simulation and Springback Analysis of Automotive Structural Part Using High-strength Steel[D].Changchu：Jilin University,2013.
［4］徐虹，仝晓辉，谷诤巍，等.顶端拉板回弹控制与影响因素分析[J].模具工业，2014,40（1）：21-24. Xu H,Tong X H,Gu Z W,et al.Control of drawing springback of top plate and analysis of influnencing factors[J].Die and Mould Industry,2014,40(1):21-24.
［5］Saran M J,Demeri M Y.Formability improvement variable binder pressure[J].Automotive Engineering International,1998，(2):101-103.
［6］邓明.冲压工艺及模具设计[M].北京：化学工业出版社，2009.Deng M. Stamping Process and Mould Designing[M].Beijing:Chemical Industry Press,2009.
［7］黄娜，余际星，成秀文，等.GQ280钢冲压成形应用及回弹控制模拟[J].锻压技术，2013,39（2）:61-62.Huang N,Yu J X,Cheng X W,et al. Stamping application and springback control for GQ280 steel[J].Forging & Stamping Technology,2013,39（2）:61-62.
［8］Tadmor R，Chen N H，Israelachvili J N. Thin film rheology and lubricity of hyaluronic acid solutions at a normal physiolo gical concentration[J]. Biomedical Materials Research,2002,61(4): 514-523.
［9］Homola A M，Israelachvili J N，Gee M L，et al. Measurements of and relation between the adhesion and friction of two surfaces separated by molecularly thin liquid films [J].Trans of the ASME,1989,111(3):675-682 .
［10］刘君仪，邓明. 高分子薄膜润滑在板料拉深中的应用研究与发展趋势[J].模具工业，2014,40(1):1-3.Liu J Y,Deng M . Research status and development of polymer film lubrication in sheet drawing[J].Die and Mould Industry,2014,40(1):1-3.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】