锻压技术

拉形与渐进成形在钣金零件快速制造中的复合应用研究

英文标题：Research on combined application of stretch and incremental forming in the sheet metal of rapid manufacture

作者：王德亮高霖王辉吴梦陵汤泽军

单位：南京航空航天大学

分类号：TG386

出版年,卷(期):页码：2015,40(2):26-31

摘要：

分析了拉形与数控渐进成形的工艺特点，开发了利用有限元分析来确定拉形不贴模区域边界的系统；设定了复合成形工艺参数，在数控渐进成形机床上实现一次装夹的复合成形。通过试验对渐进成形和复合成形的成形件质量进行了分析，结果证明，复合成形比渐进成形加工的零件成形精度高，厚度分布更均匀。对于复合成形，拉形行程越大，精度越高，但厚度减薄更严重，拉形行程过大会导致零件拉裂。凹陷区域的成形采用了固定轴跟随零件层加工，与传统的等高线层加工相比，具有较好的表面质量和较高的精度。

By analyzing process characteristic of the stretch forming（SF）and incremental forming(IF), the system which can determine the boundary without fitting the die by SF was built using finite element analysis. The process parameters of the combined forming were set in order to form on the original incremental forming equipment by one clamping system. The quality of parts by incremental forming and combined forming was analyzed through experiment. The results show that combined forming can improve the geometry accuracy and obtain more uniformity in thickness distribution. Furthermore, the larger the stroke length is, the more accuracy is obtained. However, it leads to a more serious thickness thinning and even causes parts to crack. The forming in the area of grooves is machined by part layer with fixed axis, and it has good surface quality and high accuracy compared with contour layer processing.

基金项目：

国家自然科学基金资助项目（51105203）

王德亮（1990-），男，硕士研究生高霖（1954-），男，博士，教授

参考文献：

［1］Park J J, Kim Y H. Fundamental studies on the incremental sheet metal forming technique [J]. Journal of Materials Processing Technology, 2003, 140(1-3): 447-453.
［2］Jeswiet J, Micari F, Hirt G, et al. Asymmetric single point incremental forming of sheet metal[J]. CIRP Annals-Manufacturing Technology, 2005, 54(2): 88-114.
［3］Jackson K, Allwood J. The mechanics of incremental sheet forming[J]. Journal of Materials Processing Technology, 2009, 209(3): 1158-1174.
［4］王进，姜虎森，陶龙，等. 板料渐进成形极限图测试方法研究[J]. 锻压技术, 2013，38（2）：34-36.Wang J, Jiang H S, Tao L, et al. Study on experimental method of measuring forming limit diagram in incremental sheet forming [J]. Forging & Stamping Technology,2013，38(2): 34-36.
［5］Jeswiet J, Young D. Forming limit diagrams for single-point incremental forming of aluminum sheet [J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2005, 219(4): 359-364.
［6］Kopac J, Kampus Z. Incremental sheet metal forming on CNC milling machine-tool[J]. Journal of Materials Processing Technology, 2005, 162: 622-628.
［7］Iseki H. An approximate deformation analysis and FEM analysis for the incremental bulging of sheet metal using a spherical roller[J]. Journal of Materials Processing Technology, 2001, 111(1): 150-154.
［8］Iseki H, Naganawa T. Vertical wall surface forming of rectangular shell using multistage incremental forming with spherical and cylindrical rollers[J]. Journal of Materials Processing Technology, 2002, 130: 675-679.
［9］Hussain G, Gao L, Dar N U. An experimental study on some formability evaluation methods in negative incremental forming[J]. Journal of Materials Processing Technology, 2007, 186(1): 45-53.
［10］Shim M S, Park J J. The formability of aluminum sheet in incremental forming [J].Journal of Materials Processing Technology, 2001, 113(1-3): 654-658.
［11］Araghi B T, Hirt G. Investigation into a new hybrid forming process: Incremental sheet forming combined with stretch forming [J].Manufacturing Technology, 2009, 58:225-228.
［12］Araghi B T, Hirt G. Review on the development of a hybrid incremental sheet forming system for small batch sizes and individualized production[J]. Production Process,2011, (5):393-404.
［13］Ben Ayed L, Robert C, Delamézière A, et al. Simplified numerical approach for incremental sheet metal forming process[J]. Engineering Structures, 2014, 62: 75-86.
［14］Ambrogio G, Costantino I, De Napoli L, et al. Influence of some relevant process parameters on the dimensional accuracy in incremental forming: A numerical and experimental investigation [J]. Journal of Materials Processing Technology, 2004, 153: 501-507.
［15］Wei H Y, Gao L, Li S G. Investigation on thickness distribution along bulge type incrementally formed sheet metal part with irregular shapes[A].Proceedings of the International Manufacturing Conference[C]. Hawaii，2004.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】