锻压技术

基于Deform-3D的冷轧钛管有限元分析

英文标题：Finite element analysis of cold-rolled titanium tube based on Deform-3D

作者：尹业宏黄旺邓绪水邬述晖

单位：湖北工业大学

关键词：冷轧钛管有限元模拟 Deform软件辊锻

分类号：TG335

出版年,卷(期):页码：2014,39(9):122-126

摘要：

为了改善钛管在轧制过程中出现裂纹、壁厚不均和表面花状网纹等质量问题，借助Pro/E软件对LG60HL二辊轧制过程进行简化和建模，利用Deform-3D软件对不同轧制点的应力进行计算，得出了不同轧辊在轧制过程中的应力曲线。对已有质量问题的轧辊的不合理轧制力处进行应力分析，对该处轧辊的孔型进行修改，并进行轧管轧制实验。实验结果表明，该方法使轧制效果得到了明显提高，可以对轧制结果进行有效预测，有效改善待轧管的合理变形制度及轧制工艺。

In order to improve the quality of titanium tube, which may has cracks, uneven wall thickness, flower-like reticulation on the surface and other deficiencies in the rolling process, the two-roll rolling process of LG60HL was simplified and set up the model was using Pro/E software. The stress of different rolling points was calculated by the Deform-3D software and the corresponding stress curves of different rolls in the forging process were obtained. On the basis of this, the unreasonable rolling force on rolls was analyzed, the shape of the hole was modified and then the rolling experiment was conducted. Experimental results show that the actual rolling effect is improved remarkably, and the result of the rolling can be predicted effectively. As a result, the appropriate deformation method and the rolling process are improved effectively.

基金项目：

国家创新创业资助项目（201210500019）

尹业宏（1957-），男，本科，教授

参考文献：

［1］阎雪峰, 闫菲菲, 周红兵,等.我国冷轧管机的现状及发展趋势[J].重型机械, 2010,（3）:1-7.Yan X F, Yan F F, Zhou H B, et al.Current situation and development trend of the cold rolling pipe mill in china[J]. Heavy Machinery, 2010,（3）:1-7.
［2］Yoshida H, Matsui T, Otani T, et al. Experimental investigation of the cold pilgering of tubes[J]. Annals CIRP, 1975, 24:191-197.
［3］李传民，王向丽，闫华军,等. Deform5.03 金属成形有限元分析实例指导教程[M]. 北京:机械工业出版社，2007.Li C M, Wang X L, Yan H J, et al.Tutorial of Metal Forming Finite Element Analysis[M].Beijing: China Machine Press, 2007.
［4］薛永栋，韩静涛. 基于Deform的金属压力加工数值模拟[J]. 冶金设备,2007,164(4) :34-37.Xue Y D, Han J T . Numerical simulation of metal pressure based on Deform[J]. Metallurgical Equipment, 2007,164(4):34-37.
［5］Martin J. Methods, models, and assumptions used in finite element simulation of a pilger metal forming process[J]. Computer Technology and Applications, 2003, 458:109-119.
［6］傅源. 冷轧管机轧辊加工及加工工具设计[J]. 钢管, 2003, 32（3）：36-38.Fu Y. Cold-rolling pipe mill roll processing and tool design[J]. Steel Pipe, 2003, 32（3）：36-38.
［7］李国祯. 现代钢管轧制与工具设计原理[M]. 北京：冶金工业出版社，2006.Li G Z, Modern Design Principles and Tools Rolled Steel[M]. Beijing: Metallurgical Industry Press, 2006.
［8］单德斌，吕炎，王真. 金属体积成形过程三维刚塑形有限元模拟技术的研究[J]. 塑形工程学报，1997, 4（3）：98-102.Shan D B, Lv Y, Wang Z. Three-dimensional volume of finite element simulation technology research in metal shaping f orming processes[J]. Journal of Plasticity Engineering, 1997, 4（3）：98-102.
［9］Mulot S, Hacquin A, Montmitonnet P, et al. A fully 3-D finite element simulation of cold pilgering[J]. Journal of Material Processing Technology, 1996, 60: 505-512.
［10］王先进. 钢管连轧理论[M]. 北京：冶金工业出版社，2005.Wang X J. Steel Rolling Theory[M]. Beijing: Metallurgical Industry Press, 2005.
［11］Zhang L L, Tan N L, Liu C. A new model for simulation of cold roll-forming of tubes by using spine finite strip method[J]. Sci., 2010,15(1): 70-75.
［12］吴圣华, 张士宏. TA18管件三辊冷轧三维有限元模拟[J]. 航空制造技术, 2008, (23): 78-88.Wu S H, Zhang S H. TA18 three-roll cold rolling three pipe finite element simulation[J]. Aeronautical Manufacturing Technology, 2008, (23): 78-88.
［13］邓小民.5A05、5A06合金薄壁管冷轧开裂原因分析[J]. 轻合金加工技术，2002,30（1）：36-38.Deng X M, The analysis of crack cause of 5A05, 5A06 alloy thin walled tube cold rolling[J]. Light Alloy Fabrication Technology, 2002, 30（1）：36-38.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】