锻压技术

数控拉弯机在飞机框缘类型材成形中的应用

英文标题：Application of CNC stretch bending forming machine on profile forming of aircraft frames and strips

分类号：V262.3;TG386.4

出版年,卷(期):页码：2014,39(8):47-53

摘要：

在飞机零件生产中，普遍采用拉弯成形工艺制造型材弯曲件来减小回弹，以提高制造精度，尤其是框缘类零件。详细介绍了A-7B数控转臂式拉弯机的主要结构组成、拉弯成形操作过程及工艺流程、工艺参数设置和拉弯成形能力分析方法。以客机变截面变曲率Y型常规铝合金和T型新型铝锂合金框缘零件拉弯成形技术为实例，阐述了数控拉弯机在飞机框缘类型材成形中的应用现状，并展望了型材拉弯成形技术的发展趋势。

In the production of aircraft parts,the stretch bending forming is widely used for the manufacture of bending profile in order to reduce the springback and improve the quality of components, especially for aircraft frames and strips. The main structure of machine, stretch bending operating and forming process, process parameter setting and stretch bending ability of A-7B CNC stretch bending forming machine were introduced. The example of CNC stretch bending forming machine application to common Y-shaped Al alloy with various section and curvature and new T-shaped Al-Li alloy frames were introduced, and the development trend of stretch bending forming technology was forecasted．

基金项目：

国家自然科学基金资助项目（51275420）；航空科学基金资助项目（2008ZE53037）

刘天骄（1988-），男，博士研究生；王永军（1968-），男，博士，副教授

参考文献：

［1］王永军.拉弯精确成形智能控制技术研究[D].西安:西北工业大学,2005. Wang Y J. The Intelligent Control of Stretch Bending Process[D]. Xi'an: Northwestern Polytechnical University,2005.
［2］Johnson W, Yu T X. Influence of axial force on the elastic-plastic bending and springback of a beam[J]. Mech. Working Technol.,1982,6 (1):5-21.
［3］El-Domiaty A, Shabaik A H. Bending of work-hardening metals under the influence of axial load [J]. Journal of Mechanical Working Technology, 1984,10(1):57-66.
［4］El-Domiaty A. Stretch forming of beams of non-uniform section[J].Journal of Materials Processing Technology,1990,22(1):21-28.
［5］Vollertsen F, Sprenger A, Kraus J. Extrusion, channel, and profile bending: A review[J].Journal of Materials Processing Technology,1997,87:1-27.
［6］Ouakdi E H, Louahdi R, Khirani D. Evaluation of springback under the effect of holding force and die radius in a stretch bending test[J]. Materials & Design,2012,35:106-112.
［7］Miller J E, Kyriakides S.Three-dimensional effects of the bend-stretch forming of aluminum tubes[J].International Journal of Mechanical Sciences,2003,45(1):115-140.
［8］Corona E. A simple analysis for bend-stretch forming of aluminum extrusions[J]. International Journal of Mechanical Sciences,2004,46(3):433-448.
［9］Yoshida M, Yoshida F, Konishi H. Fracture limits of sheet metals under stretch bending[J].International Journal of Mechanical Sciences,2005,47(12):1885-1896.
［10］Nanu N, Brabie G. Analytical model for prediction of springback parameters in the case of U stretch-bending process as a function of stresses distribution in the sheet thickness[J]. International Journal of Mechanical Sciences,2012,64(1):11-21.
［11］刘天骄,王永军,吴建军,等.低成本钣金成形模具技术[J].航空制造技术,2012,(8):49-52.Liu T J, Wang Y J, Wu J J,et al. Large technology of low-cost sheet metal forming mould and die [J]. Aeronautical Manufacturing Technology, 2012,(8):49-52.
［12］李小强, 周贤宾, 金朝海,等.型材拉弯数值模拟夹钳边界条件的一种等效模型[J].塑性工程学报,2009,16(1):64-69.Li X Q, Zhou X B, Jin C H, et al. An equivalent model of jawps boundary condition in numerical simulation of stretch bending for extrusions [J]. Journal of Plasticity Engineering, 2009,16(1):64-69.
［13］刘瑞.Y型材拉弯成形有限元模拟技术研究[D].西安:西北工业大学,2012.Liu R. FEM Simulation Technology on Stretch Bending for Y Section Profile [D]. Xi'an: Northwestern Polytechnical University,2012.
［14］刘天骄,王永军,吴建军,等.大型客机铝锂合金型材拉弯成形关键技术[J].航空制造技术,2012,(17):40-44.Liu T J, Wang Y J, Wu J J, et al. Large aircraft Al-Li alloy profiles stretch bending key technology[J]. Aeronautical Manufacturing Technology,2012,(17):40-44.
［15］刘天骄.铝锂合金型材拉弯成形性研究[D].西安:西北工业大学,2013.Liu T J. Formability of Stretch Bending for Al-Li Alloy Profiles [D]. Xi'an: Northwestern Polytechnical University,2013.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】