锻压技术

数控转塔冲床X-Y工作台的设计与分析

英文标题：Design and analysis of X-Y table of CNC turret punch press

作者：于英静钟佩思刘大志丁淑辉

单位：山东科技大学山东大学

分类号：TH122

出版年,卷(期):页码：2014,39(3):141-144

摘要：

分析了数控转塔冲床X-Y工作台的结构设计和传动方式，应用ANSYS软件对数控转塔冲床X-Y工作台的关键零部件进行有限元分析与计算。通过对支架的静力学分析可知，支架的最大位移量为0.0551 mm，在传动过程中对系统的影响可忽略不计，达到设计要求的精度。根据滚珠丝杠的模态分析可知，滚珠丝杠的工作频率远低于其固有频率范围，故滚珠丝杠不会发生共振现象。通过对底座横梁受力情况进行瞬态分析，得出横梁的最大位移符合工作要求。

The structure design and transmission mode of X-Y table of CNC turret punch were analyzed, and the key parts of X-Y table of CNC turret punch were analyzed and calculated based on ANSYS software of finite element analysis. The statics analysis of stents shows that the maximum displacement is 0.0551 mm, which can be neglected in the course of transmission，and attains the precision of design requirements. According to the modal analysis of ball screw, ball screw working frequency is far less than its inherent frequency range, so the ball screw resonance phenomenon does not occur. Through the transient analysis of stress distribution of base beam, the maximum displacement of beam conforms to the requirements of job.

基金项目：

山东省自然科学基金资助项目（ZR2011EEM014）

参考文献：

［1］宋春华. 数控技术的现状及发展趋势[J]. 装备制造技术, 2011,(3):114-117.Song Chunhua. Status and development trend of CNC technology[J]. Equipment Manufacturing Technology, 2011,(3):114-117.
［2］陈洁.X-Y数控工作台控制系统设计[J].新技术新工艺, 2009,(6):7-9.Chen Jie. Design of control system of X-Y CNC table[J].New Technology & New Process, 2009,(6):7-9.
［3］Yuan Weihua, Cheng Lan, Xue Mogen. Design of a step-motor control system based on FPGA[A]. ICEMI '07. 8th International Conference Electronic Measurement & Instruments[C]．Xian: Chinese Institute of Electronics，2007.
［4］Campbell, Mike. Latest and Greatest Pro/E Debuts[EB/OL]. http://machinedesign.com/, Sep.15,2005.
［5］田振亚, 东强, 文举, 等. 二维数控工作台设计[J]. 机械设计与制造, 2009,(2):179-180.Tian Zhenya, Dong Qiang, Wen Ju, et al. Design of 2D numerrical control worktable[J].Machinery Design & Manufacture, 2009, (2):179-180.
［6］梁凤喜,钟佩思,丁淑辉,等.数控冲床中旋转冲头的设计与分析[J]. 锻压技术, 2013,38(3):98-101.Liang Fengxi, Zhong Peisi, Ding Shuhui, et al. Design and analysis of CNC revolving punch[J]. Forging & Stamping Technology, 2013,38(3):98-101.
［7］王进明.悬臂主轴的ANSYS模态分析[J]. 科技信息, 2009,(15):464-468.Wang Jinming. Modal analysis of ANSYS of cantilevered spindle[J].Science & Technology Information, 2009,(15):464-468.
［8］吴志辉, 蹇兴东, 史庆春. Pro/E在结构分析中的运用[J]. 组合机床与自动化加工技术, 2008,(5): 75-77.Wu Zhihui, Jian Xingdong, Shi Qingchun. Application of Pro/E in structure analysis[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2008,(5): 75-77.
［9］天津市机床厂技术办公室. 滚动导轨设计计算资料[J]. 精密制造与自动化,1977,(4):1-40.Technology Office of Machine Tool Plant of Tianjin. Design calculations of rolling guide[J]. Precise Manafacturing & Automation, 1977,(4):1-40.
［10］钱乃岩. 滚珠丝杠使用中的问题分析[J]. 现代零部件, 2004,(10):64-66.Qian Naiyan. Problems in the use of ball screw[J]. Modern Components, 2004,(10):64-66.
［11］朱艳芳.组合机床动力滑台滚动导轨受力分析与服役寿命的计算[J].安阳大学学报,2004,(1):19-22.Zhu Yanfang. Analysis of power receiving and calculation of service life of combined machine tool power sliding platform rolling grid[J]. Journal of Anyang University, 2004,(1):19-22.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】