锻压技术

模锻液压机力偶调平系统建模和最优控制

英文标题：Modeling and optimal control of couple leveling system for die forging hydraulic press

作者：杨硕吴爱国李长滨张金

单位：天津大学

分类号：TG315

出版年,卷(期):页码：2014,39(3):76-82

摘要：

通过对200 MN模锻液压机力偶调平方式的分析，建立了其力偶调平系统的非线性模型。根据模型中存在的非线性和不确定扰动的结构特点，提出了线性二次型最优控制与反馈线性化方法相结合的双闭环控制策略，并设计了扰动估计器来抑制扰动的影响，实现液压缸的同步控制。仿真对比实验表明，该控制策略优于传统的双闭环PID控制，使调平系统获得更高的调节速度和精度，可使模具准确压合，提高锻件质量，降低废品率，为实际加工过程中的调平控制提供理论依据。

Through analyzing the couple leveling method for 200 MN die forging hydraulic press, the nonlinear mathematical model of couple leveling system for forging hydraulic press was established. A new control strategy using the combination of optimal control of linear quadratic type and feedback linearization method was presented based on the nonlinear and uncertain disturbance structure characteristic of model. And the disturbance estimator was designed to overcome the disturbance and realize synchronous control of hydraulic cylinder. Simulation results show that the proposed double-loop control strategy is better than the traditional proportional-integral-derivative control method with higher leveling speed and accuracy which can improve the quality of forging in order to lower rejection rate, and provide a theoretical basis for leveling control during the actual machining process.

基金项目：

国家科技重大专项资助项目（2009ZX04004-031）

参考文献：

［1］管国栋，吴爱国，李长滨，等. 80 MN锻造液压机控制系统的研制[J]. 锻压技术，2011,36(3):87-90.Guan Guodong, Wu Aiguo, Li Changbin, et al. Research and development of control system for 80MN forging hydraulic press[J]. Forging & Stamping Technology, 2011,36(3):87-90.
［2］张大鹏，吴爱国，杜春燕，等. 63 MN 锻造液压机控制系统的研制[J]. 锻压技术，2009,34(6):109-111.Zhang Dapeng, Wu Aiguo, Du Chunyan. et al. Research and development of control system for 63MN forging hydraulic press[J]. Forging & Stamping Technology, 2009,34(6):109-111.
［3］张金，吴爱国，李长滨，等.24 MN玻璃钢制品液压机控制系统的研制[J]. 锻压技术，2012,37(4):83-86.Zhang Jin, Wu Aiguo, Li Changbin, et al. Research and development of control system for 24 MN FRP hydraulic press[J]. Forging & Stamping Technology, 2012, 37(4):83-86.
［4］刘忠伟，刘少军，黄明辉. 巨型模锻液压机同步控制系统控制性能影响因素研究[J]. 锻压技术，2010,35(5):64-68.Liu Zhongwei, Liu Shaojun, Huang Minghui. Influence factors research on control performance of synchronous control system for giant forging hydraulic press[J]. Forging & Stamping Technology, 2010,35(5):64-68.
［5］刘忠伟，邓英剑，黄明辉，等. 800 MN巨型模锻液压机同步平衡缸的设计及其优化[J].锻压技术，2012,37(1):95-99.Liu Zhongwei, Deng Yingjian, Huang Minghui,et al. Design and optimization of synchronization balance cylinder for 800 MN giant forging hydraulic press[J]. Forging & Stamping Technology, 2012,37(1):95-99.
［6］倪敬，项占琴，潘晓弘，等. 多缸同步提升电液系统建模和控制[J]. 机械工程学报，2006,42(11):81-87.Ni Jing, Xiang Zhanqin, Pan Xiaohong, et al. Motion synchronization modeling and control for multi-cylinder electro-hydraulic elevating system[J]. Chinese Journal of Mechanical Engineering, 2006,42(11):81-87.
［7］杨逢瑜. 电液伺服与电液比例控制技术[M]. 北京：清华大学出版社，2009.Yang Fengyu. The Control of Electro-hydraulic Servo and Electro-Hydraulic Proportional[M].Beijing: Tsinghua University Press, 2009.
［8］Lu X J, Huang M H. System-decomposition-based multilevel control for hydraulic press machine[J]. IEEE Transactions on Industrial Electronics, 2012,59(4):1980-1987.
［9］易孟林. 电液控制技术[M]. 武汉：华中科技大学出版社，2010.Yi Menglin. Electro-hydraulic Control Technology[M]. Wuhan: Huazhong University of Science and Technology Press, 2010.
［10］刘震，祝晓才，罗成，等.基于Backstepping 方法的全车液压主动悬挂最优控制设计[J].控制理论与应用，2008，25(1):1-8.Liu Zhen, Zhu Xiaocai, Luo Cheng, et al. Backstepping-based optimal control design of hydraulic active suspension applied to a full-car model\[J\]. Control Theory & Applications,2008, 25(1):1-8.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】