锻压技术

基于能量分析的螺旋压力机锻造力测量方法

英文标题：Measurement method of strike force for screw press based on energy analysis

作者：孟占伟李名尧龚伟兴石然然

关键词：螺旋压力机锻造力能量分析

分类号：TG316.1+8

出版年,卷(期):页码：2014,39(3):72-75

摘要：

以能量守恒原理为基础，从锻造力和能量变化之间的关系出发，推导出飞轮蓄能螺旋压力机锻造力的递推计算式。采用标定的方法，使计算式更具实用意义。转速传感器采集飞轮角速度，通过计算机递推计算出不同时间点的成形力，最大的成形力即为所要测量的锻造力。研究结果表明：利用锻造力推导公式Pi，通过圆环标定，可有效的测出锻造力。该测量方法不同于传统测量螺旋压力机锻造力的应变片方法，为螺旋压力机锻造力的测量提供了新的借鉴方法。

The recursion formula to determine the strike force of screw press with a fly wheel to energy accumulate was derived from the relationship between the force and energy according to the energy conservation law. It was practical by means of the method of upsetting ring calibrating sample. Using rotate speed sensor to collect the fly wheel angular velocity, the forming forces at different time were got by point-by-point computation. The maximum forming force is the expected strike force. The results show that the forging force can effectively be measured by using the derived forging force formula Pi and the circle calibration. It is a new referred measurement method of strike force of screw press unlike the tradition one.

基金项目：

上海市教育委员会科研创新资助项目（12ZZ183）；上海工程技术大学研究生科研创新资助项目（13KY0513）

参考文献：

［1］中国机械工程学会塑性工程学会.锻压手册：第3卷锻压车间设备[M].北京:机械工业出版社,2007.Plastic Engineering Institute of Chinese Mechanical Engineering Society. Forging Press Manual：Vol.3 Forging Workshop Equipment [M]. Beijing: China Machine Press, 2007.
［2］杨雪春,卢怀亮,黄树槐,等.离合器式螺旋压力机的力能关系[J].中国机械工程,2003,14（7）:14-17.Yang Xuechun, Lu Huailiang, Huang Shuhuai, et al. Force-energy relationship of clutch screw press [J]. China Mechanical Engineering,2003,14（7）:14-17.
［3］类成玲.变频螺旋压力机的力能效率研究[D].淄博:山东理工大学,2009.Lei Chengling. Force-Energy Efficiency Research of Variable Frequency Screw Press[D]. Zibo：Shandong University of Technology,2009.
［4］蒋启.压力机打击力检测研究[D].上海：上海工程技术大学,2012.Jiang Qi. Press Force Detection Research [D]. Shanghai：Shanghai University of Engineering Sciences,2012.
［5］类成玲,赵婷婷,杨思一.螺旋压力机力能与频率关系分析[J].机床与液压,2009,37（7）:24-26.Lei Chengling, Zhao Tingting, Yang Siyi. Analysis of the relationship of force-energy and frequency of screw press [J]. Machine Tool & Hydraulics, 2009,37（7）:24-26.
［6］杨雪春,卢怀亮,杨国泰,等.离合器式螺旋压力机的冷击力分析[J].重型机械,2002,(6):25-27，34.Yang Xuechun, Lu Huailiang, Yang Guotai, et al. An analysis of hard blow force of clutch screw press[J].Heavy Machinery, 2002, (6):25-27，34.
［7］付增祥,王海荣,苏少博.大吨位锻压设备力能特性标定的重要性和关键技术[J].机械科学与技术,2001, 20(6):890-891. Fu Zengxiang, Wang Hairong , Su Shaobo. The importance and key techniques of load energy calibration of forging equipment with large capacity[J]. Mechanical Science and Technology, 2001, 20(6):890-891.
［8］陈峰.锻压机械力能特性标定浅析[J].锻压装备与制造技术,2012,47(3):24-25.Chen Feng. Discussion about demarcation of mechanical force features for metal forming machine [J].China Metal Forming Equipment & Manufacturing Technology, 2012，47(3):24-25.
［9］宋明正,于喜河,李淑君,等.电动螺旋压力机力能特性及试验[J].锻压技术,1999,24(6):40-41.Song Mingzheng, Yu Xihe, Li Shujun, et al. Characteristic of force-energy of electric screw press and test[J]. Forging & Stamping Technology, 1999,24(6):40-41.
［10］李军超,冯仪.电动螺旋压力机的打击能量与回程位置控制[J].华中科技大学学报:自然科学版,2009,37（7）:90-93.Li Junchao, Feng Yi. Controlling strike energy and stroke position in an electrical screw press[J]. Journal of Huazhong University of Science and Technology:Natural Science Edition,2009,37（7）:90-93.
［11］杨雪春,卢怀亮,黄树槐,等.离合器式螺旋压力机力能关系建模及打击力控制策略[J].锻压技术,2003,28(4):54-57.Yang Xuechun, Lu Huailiang, Huang Shuhuai, et al. Modeling of force energy relation and blow force control strategy of clutch screw press[J]. Forging & Stamping Technology, 2003, 28(4):54-57.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】