锻压技术

摆辗机新型椭圆运动轨迹的研究

英文标题：Study on new elliptical trajectory of orbital forming press

作者：姚万贵冯文成邵长斌袁红霞

单位：北京机电研究所

关键词：摆辗摆头椭圆运动轨迹

分类号：TG315.79

出版年,卷(期):页码：2013,38(6):73-75

摘要：

具有双偏心套的摆辗机摆头运动轨迹较为复杂，本文针对直线运动轨迹中的摆头在交变成形力的作用下会导致摆头轴断裂问题，根据摆头运动原理，建立摆头运动方程，提出并分析了摆头新型椭圆运动轨迹，改善了摆头受力状况;并总结椭圆运动轨迹变化规律，为改进摆头结构、设计新型摆辗机、拓展摆辗成形工艺提供理论指导。

The trajectories of orbital forming press head with double eccentric covers are more complex. The orbital head shaft will fracture under the action of the alternating force in linear trajectories. According to the orbital head movement principle，the motion equations was built, the new elliptical trajectory was proposed and analyzed, the orbital head force status was improved, and the elliptical trajectory variation was summarized. The research provides the theoretical guidance for improving the structure of orbital head, designing new orbital forming press, and expanding orbital forming process.

基金项目：

北京机电研究所技术发展基金资助项目；机械科学研究总院技术发展基金项目（019103002）

参考文献：

［1］胡亚民,伍太宾,赵军华.摆动辗压工艺及模具设计[M].2版.重庆:重庆大学出版社,2008.Hu Y M, Wu T B, Zhao J H. Orbital forming process and die design[M].2ed Edition. Chongqing: Chongqing University Press,2008.
［2］罗征志,曹建国,胡亚民.摆动辗压成形工艺研究现状及发展[J].锻压技术,2010,35(2):13-16.Luo Z Z, Cao J G, Hu Y M. Orbital forming technology research and development[J]. Forging & Stamping Technology,2010,35(2):13-16.
［3］张猛,黄尚宇,孙世为,等.摆动辗压运动学与摆辗机结构优化[J].锻压机械,1999,(6):19-21.Zhang M, Huang S Y, Sun S W, et al. Orbital forming kinematics and orbital forming press structural optimization[J]. Forging Machinery,1999,(6):19-21.
［4］胡亚民,车路长.PXW型摆辗机摆头运动轨迹研究[J].锻压技术,1993,18（3）:25-29.Hu Y M, Che L C.PXW orbital forming press head swing trajectory study[J]. Forging & Stamping Technology,1993,18（3）:25-29.
［5］冯文成,姚万贵,邵长斌,等.摆辗机摆头4种运动轨迹的模拟与分析[J].精密成形工程,2011,(2):1-5.Feng W C, Yao W G, Shao C B, et al. Simulation and analysis of four trajectories of orbital forming press head[J].Journal of Netshape Forming Engineering,2011,(2):1-5.
［6］刘汉贵,李祖荣,朱国瑾.摆辗运动轨迹及调整曲线的分析研究[J].金属成形工艺,1995,13（4）:90-94. Liu H G, Li Z R, Zhu G J. Analysis and study of orbital forming trajectory and adjustment curve[J]. Metal Forming Technology,1995,13（4）:90-94.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】