锻压技术

用于先进材料的先进检测技术研究

英文标题：Research on advanced measurement technology applied for advanced materials

作者：张德海崔国英白代萍闫观海郭成

分类号：

出版年,卷(期):页码：2013,38(5):1-7

摘要：

面对先进材料需求广泛，其材料制备和创新产品制造过程中涉及的力学和成形性能发生了较大的变化，应用先进检测技术研究先进材料势在必行；研究了先进检测技术的分类、区别和应用范围，分析了用于先进材料检测过程中存在的科学问题和主要内容；以欧盟设计注册委员会设计的标准弯曲试样为测试标准论证了先进检测技术在先进材料性能检测方面的应用，结果证明了先进检测技术应用在先进材料方面的可行性。

Facing widely requirements of advanced material, a lot of changes on mechanics and formability of their material preparation and innovative products have taken place during the process of manufacturing, and the research of advanced detection technology applied on advanced materials was imperative. The classification, difference and their application scope of advanced detection technology were studied, the scientific issues and the main content existed in the process of advanced materials testing were analyzed. The standardized bend specimens designed by European Design Registration Committee were taken as test samples to demonstrate the performance of the advanced testing technology applied in advanced materials. The feasibility was proved that advanced testing technology is applied in the field of advanced materials.

基金项目：

国家自然科学基金资助项目(21206152)；河南省基础与前沿技术研究项目（132300410181），河南省教育厅科学技术研究重点项目科技攻关计划（13A460372）；河南省教育厅科学技术研究重点项目指导计划项目（13B460333）；郑州市科技攻关项目（10PTGG339-8）；郑州轻工业学院校一般项目科研基金（2012XJJ012）；郑州轻工业学院博士科研基金资助项目

张德海（1973-），男，博士，副教授

参考文献：

［1］陈拥军,魏强民,李建保.先进材料科学与应用的展望[J].世界科技研究与发展，2000,22（1）：57-61.Chen Y J, Wei Q M, Li J B. The prospect of advanced material science and applications [J]. Research and Development of World Science and Technology, 2000，22（1）：57-61.
［2］贺志荣,周敬恩，王芳.先进材料及其应用研究进展[J]. 陕西工学院学报，2001，17(4)：7-12. He Z R, Zhou J N,Wang F. Progress of research on advanced materials and their applications [J]. Journal of Shanxi Institute of Technology，2001，17(4)：7-12.
［3］余红娟，陈晓星.浅议我国新材料产业的发展[J].内蒙古科技与经济，2002,（1）:50-51.Yu H J, Chen X X. A discussion on the development of Chinese new materials industry [J]. Inner Mongolia Science Technology and Economy,2002,（1）:50-51.
［4］刘林森.迎接材料革命的新高潮[J]. 中小企业科技, 2005,(5):37.Liu L S. To meet the new climax of material revolution [J]. Science-Technical on Middle-Small Business, 2005, (5): 37.
［5］颜鸣皋. 序[J]. 航空材料学报，2006,26(3). Yan M G. Preface [J]. Journal of Aeronautical Materials, 2006, 26(3).
［6］益小苏. 先进复合材料技术的挑战与创新[J].航空制造技术，2004,（7）:24-30. Yi X S.The challenge and innovation of advanced composite material technology [J]. Aeronautical Manufacturing Technology, 2004,（7）: 24-30.
［7］王瑾，李瑞涛.非均质材料的力学性能评价研究[J]. 科技创新导报, 2010，(15):13.Wang J, Li R T.Study on mechanical properties of heterogeneous materials [J]. Science and Technology Innovation Herald，2010，(15):13.
［8］解念锁.梯度功能材料的制造方法及应用[J].陕西工学院学报，2002，18(2):4-7. Xie N S.Manufactural method on functionally gradient materials and their application [J]. Journal of Shanxi Institute of Technology,2002，18(2)：4-7.
［9］冯瑞华，姜山，周晓芳.英国先进材料关键技术发展领域[J].新材料产业，2007，（4）：51-55.Feng R H, Jiang S, Zhou X F.The key technology areas of British advanced materials development [J]. Advanced Materials Industry,2007，(4):51-55.
［10］曹春晓. 一代材料一代飞机[J].知识就是力量,2011,（3）. Cao C X. Generation of material is generation aircraft [J].Knowledge is Power, 2011, （3）.
［11］钱开耘，陈英硕，王蒙.飞航导弹先进材料技术[J].飞航导弹，2009，（2）:55-58. Qian K Y, Chen Y S, Wang M. Advanced materials technology of cruise missile[J]. Winged Missiles Journal,2009,（2）:55-58.
［12］陈亚莉.无人作战飞机与先进结构材料[J].国际航空，2006，(2):41-43.Chen Y L. UCAV and advanced structure materials[J].International Aviation,2006，(2):41-43.
［13］张德海. 板料成形几何量检测与评价相关问题研究[D].西安：西安交通大学，2011.Zhang D H. Some Technic Issues for Geometry Detection and Evaluation of Sheet Forming [D]. Xian: Xian Jiao Tong University, 2011.
［14］张德海,梁晋,郭成,等.三维数字化尺寸检测在逆向工程中的研究及应用[J].机械研究与应用，2008,21(4):67-70. Zhang D H, Liang J, Guo C, et al.Research and application of 3D digital inch inspection on reverse engineering [J]. Mechanical Research & Application,2008,21(4):67-70.
［15］刘维.激光非接触测量在码盘安装调试中的应用[D].长春:中国科学院研究生院（长春光学精密机械与物理研究所）,2004. Liu W. Application of Non-contact Laser Measurement in the Disc Installation and Debugging[D].Changchun：Graduate University of Chinese Academy of Sciences (Changchun Institute of Optics and Fine Mechanics and Physics)，2004.
［16］宋涛.曲臂花键轴跳动误差非接触检测技术研究[D].长春:长春理工大学,2002.Song T.Research on Non-contact Measurement Technology of Run-out Error about Crank Shaft [D]. Changchun：Changchun University of Science and Technology，2002.
［17］潘敏.激光圆度仪研究[D].长春:长春理工大学,2007.Pan M. Study on Laser Roundness Instrument[D]. Changchun：Changchun University of Science and Technology，2007.
［18］向胜梅.非连续回转面径向跳动测量数据处理系统研究[D].长春:长春理工大学,2008.Xiang S M. The Data Processing of Measuring System for Discontinuous Gyration Surface Radial Run-out [D]. Changchun：Changchun University of Science and Technology，2008.
［19］王士峰.基于激光位移检测技术的螺纹检测仪的研制[D].长春:长春理工大学,2005. Wang S F. Development of Screwthread Detector Based on Laser Displacement Detection Technology[D]. Changchun：Changchun University of Science and Technology, 2005.
［20］徐明.高精度的车身检具——三坐标测量机
［J］.中国汽车制造,2007,（1）:36-38.Xu M. A super-precision body examination tool—three coordinate measuring machine[J].China Automobile Manufacturing,2007,（1）:36-38.
［21］俞学兰,叶佩青.航空发动机压气机叶片型面检测技术[J].航空制造技术,2007,（11）:46-48.Yu X L, Ye P Q.Detection technology of aero-engine blade compressor face[J]. Aeronautical Manufacturing Technology, 2007，（11）：46-48.
［22］钟杰，胡楚江，郭成.叶片精密锻造技术的发展现状及其展望[J]．锻压技术，2008，33（1）：1-5．Zhong J, Hu C J, Guo G.Development status and prospects of blade precision forging technology[J]. Forging & Stamping Technology，2008, 33（1）：1-5.
［23］杨洪涛，费叶泰，陈晓怀．纳米三坐标测量机不确定度分析与精度设计[J]．重庆大学学报:自然科学版，2006，29（8）：82-86．Yang H T, Fei Y T，Chen X H. Uncertainly analysis and accuracy design of nano-CMM[J]．Journal of Chongqing university:Natural Science Edition，2006, 29（8）：82-86.
［24］张现东，卜昆，程云勇.基于CMM的叶片测点采样分布方法研究[J].锻压技术，2012,37（4）：131-134. Zhang X D, Bu K, Cheng Y Y. Research on CMM-based measuring points sampling and distribution method of blade[J]. Forging & Stamping Technology，2012, 37（4）：131-134.
［25］马瑞，赵军，孟宪昌. 大型直缝焊管挠度检测系统关键技术研究[J].锻压技术，2012,37（5）：126-128.Ma R, Zhao J, Meng X C. Key technology of deflection detecting system for large longitudinal welding pipe[J]. Forging & Stamping Technology，2012, 37（5）：126-128.
［26］金观昌，孟利波，陈俊达，等．数字散斑相关技术进展及应用[J]．试验力学，2006，21（6）：689-702．Jin G C, Meng L B, Chen J D，et al. The progress and application of digital speckle correlation method [J].Journal of Experimental Mechanics,2006，21(6):689-702.
［27］Yu Y L，Zhao H X. A novel demodulation scheme for fiber Bragg grating sensor system [J]. IEEE Photonics Technology Letters, 2005, 17 (1): 166-168.
［28］Caucheteur C, Wuilpart M, Bette S. Wavelength dependency of degree of polarization for uniform Bragg grating written into polarization maintaining optical fibers [J]. Optical Communications, 2005, 247 (4-6): 325-333.
［29］林君建，苍桂华．摄影测量学[M]．北京：国防工业出版社，2006． Lin J J, Cang G H. Photogrammetry[M]．Beijing：National Defence Industry Press，2006.
［30］黄桂平．数字近景工业摄影测量关键技术研究与应用[D]．天津：天津大学，2005．Huang G P. Study on the Key Technology of Digital Close Range Industrial Photogrammetry and Applications[D]．Tianjing：Tianjing University, 2005.
［31］冯文灏．近景摄影测量—物体外形与运动状态的摄影法测定[M]．武汉：武汉大学出版社，2002．Feng W H. Determination of Photogrammetry—Object Shape and Motion State[M]. Wuhan：Wuhan University Press, 2003.
［32］张剑清，胡祺．工业钣金件的三维立体量测[J].武汉大学学报:信息科学版，2006，31（5）：387-398． Zhang J Q, Hu Q. An adaptive thresholding approach based on spatical curved surface fitting[J]. Geomatics and Information Science of Wuhan University，2006，31（5）：387-398．
［33］张永军，刘经南，张祖勋，等．基于非量测CCD 摄像机的钣金件误差检测[J]．测绘学报，2004，33（2）：132-137．Zhang Y J, Liu J N, Zhang Z X，et al. Impression inspection of sheetmetal parts with non-metric CCD camera[J]. Acta Geodaetica Et Cartographica Sinica，2004，33（2）：132-137．
［34］张德海，白代萍，吴超，等. 板料成形几何尺寸光学检测精度评价的新方法研究[J].锻压技术，2012,37（6）：96-100.Zhang D H, Bai D P, Wu C，et al. New evaluation method of optical detection accuracy for sheet metal forming size[J]. Forging & Stamping Technology, 2012, 37（6）：96-100.
［35］Hore S, Qiu B, Wu H R. Improved vector filtering for color images using fuzzy noise detection [J]. Optical Engineering, 2003, 42 (6): 1656-1664.
［36］Yang Y Y, Jin Z H, Wang R F. 2D elasto-plastic FE simulation of the drawbead drawing process [J]. Journal of Materials Processing Technology, 2002, 120 (1-3): 17-20.
［37］侯文广，吴庆双，陈大为．一种基于空间后方交会的三维坐标测量方法[J]．测绘信息与工程，2006，3（1）：6-7．Hou W G, Wu Q S, Chen D W. A new method for 3D coordinates acquisition based on spatial resection [J]. Journal of Geomatics, 2006，3（1）：6-7．
［38］张德海，梁晋，唐正宗，等．板料变形三维数字散斑应变测量分析系统研究[J]．锻压技术，2010，35（4）：27-31． Zhang D H, Liang J，Tang Z Z，et al. 3D digital speckle analysis system for dynamic strain measurement in sheet deformation [J]. Forging & Stamping Technology，2010，35（4）：27-31．
［39］王书明，王超群，杜志伟，等. 7B04铝合金织构沿厚度变化的研究[J]. 稀有金属，2012，36(3): 363-367.Wang S M, Wang C Q, Du Z W, et al. Texture analysis for 7B04 Al alloy plate along thickness direction [J].Chinese Journal of Rare Metals, 2012，36(3): 363-367.
［40］刘国钧, 徐骏, 杨柳青. 镁合金板带铸轧技术与进展[J]. 稀有金属，2012，36(3): 477-482.Liu G J, Xu J, Yang L Q. Research and technology development on sheet casting of magnesium alloys [J].Chinese Journal of Rare Metals, 2012，36(3): 477-482.
［41］洪涛，龚园平，田妮，等. 固溶温度对新型Al-12.7Si-0.7Mg合金挤压材组织性能的影响[J]. 稀有金属，2012，36(3): 368-372.Hong T, Gong Y P, Tian N, et al. Effect of solution temperature on microstructure and properties of Al-12.7Si-0.7Mg aluminum alloy extrusion [J].Chinese Journal of Rare Metals, 2012，36(3): 368-372.
［42］许云书.射线技术与我国先进材料的研究与发展[J].中国工程科学，2009，11(2)：22-32.Qian Y S. Radiation technology and advanced materials research and development in China [J]. Engineering Science，2009，11(2)：22-32.
［43］梁伟，黄启斌，杨晓翔.基于热转印技术的应变测量网格印制法[J]．锻压技术，2012，37（6）：101-103．Liang W, Huang Q B, Yang X X. Grid-scribed technology for sheet forming strain measuring based on thermal transfer [J]. Forging & Stamping Technology，2012,37（6）：101-103.
［44］Burguete R, Hack E, Kujawinska M, et al. Developing standards for optical methods of strain measurement [OL]. http:∥www.twa26.org/341_pat_v1.pp.1-6.
［45］Burguete R, Hack E, Kujawinska M, et al. Design of reference materials and standardized test for optical strain measurement [OL]. http:∥www.twa26.org/295_pat_v1.pp.1-6.
［46］ASTM C1377-1997(2007),Standard test method for calibration of surface/stress measuring devices [S].
［47］Standardized project for optical techniques of strain measurement (SPOTS) [S/OL]. EU contract no. G6RD-CT-2002-00856, http:∥www.opticalstrain.org.
［48］Hack E, Sims G, Mendels D. Traceability, reference materials and standardized tests in optical strain measurement [A]. 12th International Conference on Experimental Mechanics[C]. Italy:Bari,2004.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】