锻压技术

螺旋线材数控代码的生成与应用

英文标题：Generation and application of NC code for spiral wire

作者：卢杰姚斌李晓卉欧阳醌熊雄

分类号：TG356

出版年,卷(期):页码：2013,38(4):64-67

摘要：

针对螺旋类线材的推弯成形，提出了一种数控代码自动生成方法，并以曲线模型相对复杂的等节距圆锥螺旋弹簧为例进行着重阐述。该方法通过提取线材几何建模参数，并结合推弯模具的结构尺寸和运动形式，建立线材推弯成形的数学模型，推导出送料轴、推弯轴和转臂轴三轴间的联动关系，最后采用等间距直线逼近法生成线材零件的数控加工代码并进行加工生产。试验证明，该方法编程效率高，修改方便，且加工零件可以满足精度要求。

A way of automatically generating NC code for the push bending of spiral wire was introduced, and the equal-pitch conoid helical-coil spring whose curve model is relatively complex was emphatically discussed. Through extracting wire parameters of geometric modeling, and combining with the structure size and movement of push bending dies, the mathematical model of the push bending of spiral wire was made, and the linkage relationship among the feed axis, the push bending axis and the rotational axis was derived. Finally NC code was generated by equidistant linear approximation and the processing production was done. The experiment result shows that the programming efficiency of this method is high, the modification is easy, and the parts produced can meet the requirement of accuracy.

基金项目：

国家科学技术部支撑项目（SQ2009GJC4001675）

卢杰（1989-），男，硕士研究生

参考文献：

［1］丁士德. 五轴数控卷簧机控制系统设计与实现[J] . 电子工程师, 2002, 28（4）: 10-14. Ding S D. Design and realization of the control system for 5-axle numeric control spring machine[J]. Electronic Engineer, 2002, 28（4）:10-14.
［2］赵章风，李克彬，林伟明.三维数控线材成型机控制系统[J].轻工机械，2007，25（4）：81-84.  Zhao Z F, Li K B, Lin W M. Control system of 3D numeric wire forming machine[J]. Light Industry Machinery, 2007, 25（4）:81-84.
［3］韩刚. 旋转机头式数控弯丝机的设计与研究[D]. 西安：西安建筑科技大学，2011.   Han G. Design and Research of the Rotary Head Numerical Control Bending Wire Machine[D].Xian: Xian University of Architecture and Technology, 2011.
［4］叶志坚,陈明辉,路如升,等.线材弯曲成形机理的研究[J].锻压技术,2009,34（2）：121-123.   Ye Z J, Chen M H,Lu R S, et al. Research on wire bending technique[J]. Forging & Stamping Technology ,2009,34(2):121-123.
［5］林荣坤.数控弯丝机系统的研发与应用[D].厦门：厦门大学,2011.     Lin R K. Research and Development of CNC System for Wire Bending Robot[D]. Xiamen: Xiamen University, 2011.
［6］郑文晶. 解析几何[M].哈尔滨：哈尔滨工业大学出版社，2008. Zheng W J. Analytic Geometry[M]. Harbin: Harbin Institute of Technology Press,2008.
［7］沈一凛.数控弯丝机线材成形软件设计[D]. 厦门：厦门大学,2011.Shen Y L. Design on Software of Wire Modeling with CNC Wire Bending Machine[D]. Xiamen: Xiamen University, 2011.
［8］倪春杰,姚振强,张立文.用等间距法直线逼近非圆曲线[J].机械设计与研究,2010,（4）：17-19.Ni C J, Yao Z Q, Zhang L W. The reasonable approach of determining step size for Interpolation of non-circle curve by linear approximation[J]. Machine Design and Research, 2010,（4）：17-19.
［9］宋兆沛. 数控加工程序编制中非圆曲线的节点计算[J].现代制造工程, 2008,（2）: 63-65.Song Z P. The calculation of non-circular profile of the irregular curve for programming of CNC machining[J]. Modern Manufacturing Engineering, 2008,（2）: 63-65.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】