锻压技术

基于有限元逆、正向法的双盒形件成形毛坯优化

英文标题：Blank optimization for doublebox drawing based on inverse and forward finite element methods

作者：陈巧玉肖小亭黄里成谭利广

单位：广东工业大学

关键词：逆向法正向法双盒形件毛坯优化

分类号：TG1301

出版年,卷(期):页码：2012,37(6):171-173

摘要：

优化成形毛坯有助于提高产品成形质量与成形极限，降低生产成本。本文中的双盒形件以双槽台盆为例，结合有限元逆向法、正向法进行其毛坯优化工作。经过有限元法优化后的毛坯比原用毛坯更节省材料，且在相同拉深条件的模拟与对比实验中，优化后毛坯的拉深极限高度和成形质量有一定的提高，体现有限元法在复杂盒形件毛坯优化工作的应用有效性及准确性。

Material formability and drawing limit could be improved by the optimization of blanks and production cost also could be reduced. The deep drawing of double-box was chosen as the example to optimize blank by the inverse and forward finite element methods. The optimized blank was smaller than the original one. The drawing limit height and the productions quality were improved by the optimized blank in the finite element analogy and contrast experiments with the same situations. The results show that the finite element analogy is effective and accurate when it is used in the blank optimization of complex box drawing.

基金项目：

参考文献：

［1］Yuung Hwalu, Ching Lunli, Sy weilo. A study of the optimum blank for square cup drawing using the streamline method[J]. Journal of Materials Processing Technology, 2001，(110):145-151.
［2］Hyunbo Shim, Kichan Son, Kwanghee Kim. Optimun blank shape design by sensitivity analysis[J]. Journal of Materials Processing Technology, 2000，(104):191-199.
［3］王雪刚，石伟. 基于有限元反向法的板料成形毛坯设计[J]. 塑性工程学报，2004，11(3):64-68.
［4］张燕琴，王波，张祖军,等. 基于正反向模拟的板料成形毛坯精确设计[J]. 模具工业，2007，33（8）：5-8.
［5］苗量，陈文琳，李桂兰. 基于有限元逆向法和正向法的板料成形过程中合理毛坯形状的确定[J]. 锻压技术，2006，31（2）：15-18.
［6］翁其金，徐新成.冲压工艺及冲模设计[M].北京：机械工业出版社，2004.
［7］郭敏杰，曾珊琪. 基于Dynaform的汽车覆盖件成形中拉延筋的设置与数值模拟[J]. 装备制造，2009，9（4）：99-105.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】