锻压技术

7475铝合金网格筋条壁板蠕变成形的试验和数值模拟

英文标题：Experiment and numerical simulation of creep forming for 7475 aluminum alloy integrally stiffened panel

作者：郑英吴阳张劲邓运来

关键词：铝合金蠕变成形网格筋条壁板回弹

分类号：TG306；TG146.2+1

出版年,卷(期):页码：2012,37(5):42-46

摘要：

在热压罐条件下进行了7475铝合金单曲率网格筋条壁板的蠕变成形试验，使用三坐标测量法获得了成形壁板在不同横截面上的曲率半径，并对壁板蠕变成形后的回弹分布规律进行了分析。之后通过蠕变拉伸试验，得到了材料在成形试验条件下的蠕变本构模型参数，通过用户子程序补充到ABAQUS有限元模型中，并模拟分析了该壁板在真空热压加载蠕变卸载过程中的应力应变规律，模型对壁板回弹量的预测与试验结果吻合良好，误差小于4%。

Single curvature panel with grid\|type ribs of 7475 aluminum alloy was investigated under the creep aging forming conditions by autoclave process. The curvatures of different sections were measured by three coordinates measuring method; springback distribution laws in different areas of the formed panel were discussed. Then the constants of the unified creep constitutive equation were determined from creep aging test data, which was integrated with FE codes in ABAQUS. Based on this, the whole process of creep ageing forming was simulated and analyzed. Close agreement between experimental data and computed results was obtained. The relative error is less than 4%.

基金项目：

国家重点基础研究发展计划(973)资助项目(2010CB731700)

参考文献：

［1］Adachi T, Kimura S, Nagayama T, et al. Age forming technology for aircraft wing skin[A].9th International Conference on Aluminium Alloys[C]. Australia:Brisbane, 2004.
［2］Ashby, M F, Ferreira P J, Schodek D L.Design environments and systems[A].Nanomaterials, Nanotechnologies and Design 2009[C].Boston,2009.
［3］Guines D, Gavrus A, Ragneau E.Numerical modeling of integrally stiffened structures forming from creep age forming technique[J]. International Journal of Material Forming, 2008，1: 1071-1074.
［4］Ho, K C, Lin J, Dean T A. Modelling of springback in creep forming thick aluminum sheets[J]. International Journal of Plasticity, 2004，20:733-751.
［5］Huang L, Wan M, Chi C, et al., FEM analysis of spring\|backs in age forming of aluminum alloy plates[J]. Chinese Journal of Aeronautics, 2007，20:564-569.
［6］Kentfield J A C. Aircraft with outboard horizontal stabilizers, history, current status, development potential[J]. Progress in Aerospace Sciences，2009，45(68):169-202.
［7］Li C, Wan M, Wu X D, et al. Constitutive equations in creep of 7B04 aluminum alloys[J]. Materials Science and Engineering: A, 2010，527(1617):3623-3629.
［8］Lin J, Jeunechamps P P, Ho K C, et al. A closed form technique to predict springback in creep age-forming[J]. International Journal of Mechanical Sciences, 2006，48: 621-629.
［9］Liu C, Wang J B, Zhang X J. Digital manufacturing system of aircraft wing integral panel[A]. 2009 International Conference on Manufacturing Science and Engineering[C]. Zhuhai, 2009.
［10］Yan Y, Wan M, Wang H B. FEM equivalent model for press bend forming of aircraft integral panel[J]. Transactions of Nonferrous Metals Society of China, 2009，19(2):414-421.
［11］赵弘弘, 李东升, 李东强. 基于多点模具的壁板时效成形工装关键技术研究[A].第六届华北(扩大)塑性加工学术年会论文集[C].北京:2009.
［12］黄硕, 万敏, 黄霖, 等. 铝合金蠕变试验及本构模型建立[J]. 航空材料学报, 2008，28(1):93-96.
［13］黄硕, 曾元松，黄遐. 2324铝合金蠕变时效成形有限元分析[J]. 塑性工程学报, 2009，16(4):129-133.
［14］黄遐, 曾元松. 7075铝合金蠕变时效成形过程数值模拟[J]. 塑性工程学报, 2010， 17(6):51-54.
［15］吕源, 甘忠. 壁板结构对时效成形回弹影响的研究[J]. 锻压装备与制造技术, 2011，46(1):87-90.
［16］李鹰.网格式高筋条整体壁板典型件成型工艺研究[D].沈阳：沈阳理工大学，2007.
［17］王俊彪, 刘中凯，张贤杰.大型机翼整体壁板时效成形技术[J]. 航空学报, 2008，29(3):728-733.
［18］甘忠, 张磊，徐旭东，等.整体壁板时效成形模具回弹补偿的工艺研究[J]. 塑性工程学报, 2010，17(5)：15-18.
［19］邓运来, 周亮，晋坤，等.2124铝合金蠕变时效的微结构与性能[J]. 中国有色金属学报, 2010，20(11):2106-2111.
［20］周亮,邓运来，晋坤，等. 预处理对2124铝合金板材蠕变时效微结构与力学性能的影响[J]. 材料工程, 2010，(2):81-85.
［21］Zhan L, Lin J, Dean T A, et al.Experimental studies and constitutive modelling of the hardening of aluminium alloy 7055 under creep age forming conditions[J]. International Journal of Mechanical Sciences, 2011. 53(C):595-605.
［22］Kowalewski Z L, Lin J, Hayhurst D R. Experimental and theoretical evaluation of a high-accuracy uni\|axial creep testpiece with slit extensometer ridges[J]. International Journal of Mechanical Sciences, 1994，36(8):751-769.
［23］邓运来, 张劲, 张新明. 连续矩形盒壁板的冲压成形试验与模拟研究[J]. 锻压技术, 2010，35(5)：32-37.
［24］程勇胜，郑子樵，李秋菊.时效制度对7475铝合金组织与性能的影响[J]. 轻合金加工技术，2001，29（6）：40-44.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】