网站首页期刊简介编委会过刊目录投稿指南广告合作征订与发行联系我们English
高速钢斜撑块精密挤压成形工艺与性能研究
英文标题:Research on precise extrusion process and property of high-speed steel sprag
作者:单垄垄 辛选荣 
单位:河南科技大学 洛阳秦汉冷锻有限公司 
关键词:精密挤压 W6Mo5Cr4V2高速钢 斜撑块 数值模拟 
分类号:TG376.2
出版年,卷(期):页码:2012,37(3):67-72
摘要:

研究了W6Mo5Cr4V2高速钢的材料及高温锻造性能,对W6Mo5Cr4V2高速钢斜撑块在挤压过程中出现的金属分区流动情况进行了Deform-3D数值模拟分析。通过制定合理的设计、调整挤压工艺参数并确定凹模结构,解决了高速钢斜撑块精密成形过程中出现的弯曲、开裂、精度低等问题,并生产出合格的产品。对比分析了高速钢斜撑块挤压前后的金相组织,结果发现挤压成形工艺可以有效的细化晶粒、均匀碳化物分布并改善材料的组织性能。

Through the research of the material and forge ability under high temperature and the analysis of the different metal zonal flows of the high-speed steel in extrusion process by Deform-3D, the extrusion process technological parameters were rationally designed and adjusted. And then the female-die was optimized to solve problems, such as the bend, flaw, low precision etc. and the qualified parts were obtained. Meanwhile, by contrasting the metallographic structure before and after extrusion of the high-speed steel, the refined grains, homogenous carbide distribution and improved structure property were obtained by extrusion process.

基金项目:
作者简介:
参考文献:


[1]张再德.航空发动机高速附件传动系统研究与设计[D].南京:南京航空航天大学,2007.
[2]朱自冰.高速超越斜撑离合器设计技术研究[D].南京:南京航空航天大学,2004.
[3]秦茶,吴立志,许昌玲,等.M2高速钢碳化物堆积的研究[J].热加工工艺,2008,37(14):31-34.
[4]杜文华.变形率、缓冷、退火工艺对M2高速钢(扁钢)脱碳影响的研究[D].天津:河北工业大学,2007.
[5]王宝顺,林奔,罗坤杰,等.玻璃润滑剂在钢热挤压工艺中的应用[J].钢铁世界,2010,(3):44-50.
[6]梁敬斌. 压力加工对碳化物均匀性与性能的影响[D].天津:河北工业大学,2007.
[7]王存宇,时捷,惠卫军,等.提高热成形钢塑性的工艺研究[J].锻压技术,2011,36(2):128-130.
[8]洪慎章.冷挤压使用技术[M].北京:机械工业出版社,2006.
[9]王金国,周宏,苏源德,等.高碳高钒高速钢的高温度硬度计热处理的研究[J].金属热处理,2000,(3):22-24.
[10]黄海波,腾生磊,韩帅帅,等.精锻成形回弹现象的研究现状及展望[J].锻压技术,2011,36(4):17-19.
[11]GB/T 99432008.高速工具钢[S].

服务与反馈:
本网站尚未开通全文下载服务】【加入收藏
《锻压技术》编辑部版权所有

中国机械工业联合会主管 北京机电研究所有限公司 中国机械工程学会塑性工程分会主办
联系地址:北京市海淀区学清路18号 邮编:100083
电话:+86-010-82415085 传真:+86-010-62920652
E-mail: fst@263.net(稿件) dyjsjournal@163.com(广告)
京ICP备07007000号-9