锻压技术

板件冲压连接技术研究

英文标题：Research on sheet stamping connection technology

作者：赵昊李智春

关键词：板件冲压连接数值模拟

分类号：TP386

出版年,卷(期):页码：2011,36(6):15-18

摘要：

为研究板件冲压连接技术中冲压力和模具几何参数对连接点质量的影响规律，结合实验与数值模拟综合分析了板料连接工艺中冲压力和模具形状尺寸对连接点的颈厚值、互锁量和X值的影响及材料流动规律。结果表明,冲压力的提高一定程度上增加了连接点强度，凹模型腔深度对其影响更为显著，并证明实验与模拟的综合分析能够更为深入地掌握冲压连接技术的机理。

For researching the influence law of stamping pressure and mould geometrical parameter in stamping connection on the quality of mechanical clinched ioint, the influence law of stamping pressure and mould geometrical parameters on the neck thickness, interlock and X value of the connection point, and material flow were comprehensively analysed based on the experiments and numerical simulations. The experiment and simulation results show that increasing stamping pressure enhances the mechanical clinched joint strength in a certain degree, and the die cavity depth influences it even more significantly. It is proved that the stamping connection technology mechanism can be mastered in more detail in combination of experiment and simulation analysis.

基金项目：

参考文献：

[1]奥尔特温·哈恩，乌韦·克勒门斯.机械变形连接[M].北京：化学工业出版社, 2005.

[2]Varis J P. The suitability of round clinching tools for high strength structural steel[J]. Thin-Walled Struct., 2002,(40):225-238.

[3]Varis J P. The suitability of clinching as a joining method for high-strength structural steel[J]. Journal of Ma-terials Processing Technology，2003,(32):242-249.

[4]Paulaa A A de, Aguilarb M T P,Pertenc-ec A E M,et al. Finite element simulations of the clinch j-oining of metallic sheets[J]. Materials Processing Technology,2007,(182):352-357.

[5]Neugebauer R, Kraus C, Dietrich S. Advances in mechanical joining of magnesium[J]. CIRP Ann-Manuf. Technol,2008,(57):283-286.

[6]楼铭.自冲铆接设备研制及轻量化材料自冲铆接工艺开发[D].上海：上海交通大学，2009.

[7]TOX.PRESSOTECHNIK.Overview of the TOX-Clinching Technology[EB/OL].www.tox-en.com.2011.09.

[8]周朝辉,曹海桥,吉卫,等.Deform有限元分析系统软件及其应用[J].热加工工艺,2003,32(4): 51-52.

[9]杨楠，胡秀丽，邢忠文. 冲压件表面冲击线影响因素的数值模拟分析[J].锻压技术,2010,35(3):47-51.

[10]吴江妙，杨志强. 不等厚板料液压成形数值模拟和试验研究[J].锻压技术,2010,35(1):29-31.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】