[1]Gleiter H. Nanocrystalline materials[J]. Progress in Materials Science,1989,33(4):223-315. [2]王军丽,史庆南.纳米超细晶材料的制备方法[J]. 材料导报,2005, 19(5): 15-19. [3]Valiev R Z,Islamgaliev R K,Alexandrov I V.Bulk nano\|structured materials from severe plastic deformation[J].Prog.Mater.Sci., 2000,45(2):103-189. [4]赵新,高聿为,南云,等. 制备块体纳米/超细晶材料的大塑性变形技术[J]. 材料导报,2003,17(12):5-8. [5]Segal V M. Equal channel angular extrusion of flat products[J]. Materials Science and Engineering,2008,178-185. [6]Aoki K, Kimura Y, Azushima A, et al.Ultrafine grained steels[M].Tokyo (Japan):The Iron and Steel Institute of Japan,2001. [7]Iwahashi Y,Wang J, Horita Z, et al. Principle of equalchannel angular pressing for the processing of ultrafine grained material[J].Scripta. Mater.,1996 (02):143. [8]Shin D H,Kim I,Kim J,et a1.Ge nitride formation in N-doped amorphous[J]. Applied Physics Letters,2007, 91(8): 1-3. [9]Bridgman P W. Studies in Large Plastic Flow and Fracture[M]. New York:McGraw-Hill,1952. [10]Valiev R Z,Mukherjee A K. Nanostructures and unique properties in intermerallies ,subjects to severe plastic deformation[J]. Scripta.Mater.,2001,44 (8/9): 1747-1750. [11]Saito Y, Utsumomiya H, Tsuji N, et al. Novel ultra-high straining process for bulk materials: development of the accumulative roll\|bonding process [J]. Acta. Mater., 1999, 47(2): 579. [12]Salishchev G A,Valiakhmetov O R,Galeyev R M.Mechanical behaviour of fine grained TiAl intermetallic compound-I superplasticity[J].Journal of Materials Science,1993,(28):2898. [13]柏艳辉,周南强,白彬,等. 采用旋压法实现材料表面纳米化[J]. 中国工程物理研究院科技年报,2003,(1):471. [14]贾新朝,姚草根,吕宏军,等. 细晶薄壁筒形件的旋压成形[J].航空制造技术,2007,(2):516-518. [15]Huang J Y,Zhu Y T,Alexander D J,et al. Development of repetitive corrugation and straightening[J].Mater. Sci. Eng. A ,2004,371(1/2):35-39. [16]Ueji R,Tsuji N.Nanoscale crystallographic analysis of ultrafine grained IF steel fabricated by ARB process[J]. Acta. Mater.,2002,(02):4177. [17]Aoki K,Kimura Y. Mater. Sci. Forum[R].2003. [18]张郑,王经涛,赵西成. 7475铝合金ECAP的晶粒细化极限[J]. 中国有色金属学报, 2004, 14(5): 741-745. [19]陈明,刘长瑞,杜忠泽,等.连续变断面体挤压过程金属的变形特征[J].热加工工艺,2007,32(17):43-45. [20]Jian Wei-wei,Kang Zhi-xin, LI Yuan-yuan.Effect of hot plastic deformation on microstructure and mechanical property of Mg-Mn-Ce magnesium alloy[J].Trans Nonferrous Met. Soc. China,2007,17(6):1158-1163. [21]Ma A,Lim S W, Nishiha Y.Superplasticity of finegrained AZ91 alloy processed by rotarydie equalchannel angular pressing[J]. Mater. Sci. Forum,2003,(426432):27-35. [22]Ghosh A K,Huang W. Ultrafine Grain Materials[M].TMS,2000. [23]Qi Yang. Mechanical properties and structural evolution during deformation of fine grain magnesium and aluminum alloys [D]. Michigan:The University of Michigan, 2005.
|