|
摘要：
|
|
根据大量矩形盒拉深试验结果 ,对成形过程中的几何形状效应进行了分析和总结。指出形状参数rc/w直接决定矩形盒相对拉深比和法兰变形加工度 ,并与成形极限密切相关。rc/w小 ,法兰曲边变形加工度大 ,变形缓和作用增强。rc/w大 ,板坯的几何形状效应增强 ,适当改变板坯形状和长、短边相对尺寸可提高成形极限
|
|
The geometric shape effect in the process of forming is analyzed and summarized based on a great deal of drawing experiments of rectangular case. It's pointed out that the relative drawing ratio of rectangular case and flange deforming machining degree depend directly on r c/w , the geometric shape parameter, which is closely related to the forming limit too. When r c/w becomes small, the deforming machining degree of flange corner side is increased, and the mitigatory function of deformation of straight side is strengthened. When r c/w becomes big, the geometric shape effect of blank is strengthened and forming limit can be raised by changing blank shape and relative size of long side and short side properly.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
|
~~
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
