|
阶梯型内凹筒型件液压拉深成形极限研究
|
|
英文标题：On the forming limits of hydromechanical forming of components with stepped re-entrant punch |
|
作者：吴建军 |
|
单位：西北工业大学机电工程学院 710072 |
|
关键词：液压拉深 液压反力 有限元 |
|
分类号：TG356 |
|
出版年,卷(期):页码：2004,29(1):38-40 |
|
摘要：
|
|
应用ABAQUS/Explicit有限元软件 ,对不同特征尺寸的阶梯型内凹筒型件液压拉深成形中液压反力的上、下成形极限进行了研究 ,探讨了相应的液压反力工作区域以及工作区域的变化特征 ,并对拉深件的破坏模式以及相对优化的加载路径进行了讨论
|
|
FE simulation using ABAQUS/Explicit was used to investigate the upper and lower limits of counter pressure in the hydromechanical deep drawing(HDD) with different sizes of stepped re\|entrant punch. At the same time, great attention are devoted to give the working zone of counter\|pressure as well as its variation characteristics Based on this, the rapture models for this forming process and the optimal loading paths are also discussed in this paper.
|
|
基金项目：
|
|
留学回国人员基金;;
航空科学基金 (0 0H530 72 ) ;;
国家 863计划资助项目 (2 0 0 2AA4640 60 )
|
|
作者简介：
|
|
|
|
参考文献：
|
1 SHZhang,MRJensenAnalysisofthehydromechanicaldeepdrawingofcylindricalcupsJMater.Process.Technol.,2000,103:367～373
2 SYossofon,JTiroshRuptureinstabilityinhydroformingdeepdrawingpro cessInt.Mech.Sci,1985,27(9):559～570
3 DYYang,JBKimInvestigationintomanufacturingofverylongcupsbyhydromechanicaldeepdrawingandironingwithcontrolledradialpres sureAnnalsoftheCIRP ,1995,44(1):255～258
4 TNakagawa,KNakamura,HAminoVariousapplicationsofhydrauliccounterpressurecounterpressuredeepdrawingJMaterProcess.Tech nol.,1997,71:160～167
5 NBay,SSkytteJensenFormingLimitsinHydromechanicalDeepDraw ingAnnalsoftheCIRP ,1994,43(1):253～256
6 YQin,RBalendraFEsimulatonofhydromechanicaldrawingofcompo nentswithconcavelocalfeaturesProceedingsofthefourthinternationalconferenceonsheetmetal,Enschede,theNetherlands,1996,2:205～214
7 SYossifonandJTiroshOnthepermissiblefluid pressurepathinhydroform ingdeepdrawingprocesses analysisoffailuresandexperimentsJournalofEngineeringforIndustry,1988,110:146～152
|
|
服务与反馈：
|
|
【文章下载】【加入收藏】
|
|
|
|
