|
摘要：
|
|
应用商用有限元软件ANSYS/LS-DYNA,对板料的双向加压液压胀形过程进行了数值模拟。并利用韧性断裂准则作为胀形高度极限的判断依据,将模拟得到的必要数据代入到准则中。对两种材料、不同初始液体压力条件下的模拟结果表明,随着初始液体压力的升高,胀形的极限高度也相应的增加,当初始压力与板料的强度相当时,极限高度提高的更明显。
|
|
The double sides pressurized hydroforming process of metal sheet is numerically simulated by applying the commercial FEM software ANSYS/LS-DYNA.Using the ductile fracture criterion as the reference for judging the limit height of the process to put the necessary simulation results into the criterion.The simulation results of two materials under different initial liquid pressure represent that the limit height of the hydroforming could be boosted by increasing the initial liquid pressure,and the limit height could be boosted obviously when the initial pressure and the strength of the sheet are in the same rank.
|
|
基金项目：
|
|
河北省自然科学基金项目(503292)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]杨玉英.实用冲压工艺及模具设计手册[M].北京:机械工业出版社,2005.
[2]王忠金,王仲仁.板料粘性介质胀形过程应变速率的模拟研究[J].塑性工程学报,1999,(3):46 48.
[3]王新云,夏巨谌,胡国安,等.板件粘性介质压力成形新工艺[J].新技术新工艺,2004,(1):37 38.
[4]刑晓东,郭斌,罗荣华,等.板材粘性压力成形技术研究进展[J].中国机械工程,2001,12(2):231 234.
[5]Takuda H,Mori K,Hatta N.The application of some criteriafor ductile fracture to the prediction of the forming limit ofsheet metals[J].Journal of Materials Processing Technolo-gy,1999,95(1 3):116 121.
[6]Lei L P,Kang B S,Kang S J.Prediction of the forming limitin hydroforming processes using the finite element method anda ductile fracture criterion.Journal of Materials ProcessingTechnology.2001,113(1 3):673 679.
[7]于忠奇.基于Lemaitre损伤理论的韧性断裂准则建立及板料成形极限的预测[D].哈尔滨:哈尔滨工业大学.
[8]翁文达,王承忠.液压胀形中薄板极限胀形高度H与力学性能间的相关性研究[J].理化检验—物理分册,2000,36(6):247 251.
[9]宋玉泉,刘术梅,管志平.筒形模超塑充模胀形的力学解析[J].自然科学进展,2004,14(3):1142 1149.
[10]王新云,夏巨谌,胡国安,等.粘性介质反向压力胀形对5A02铝合金板成形性的影响[J].锻压机械,2002,(6):40 43.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
