|
摘要：
|
|
以TiO2陶瓷粉末为研究对象,采用间接加工方式对其进行低电压电磁压制成形,在成功压制出高密度制品的基础上,分析成形线圈及集磁器结构对粉末压实密度、制品密度和制品微观组织的影响。研究结果表明:其他放电参数不变的条件下,当放电线圈的匝数增加时,毛坯的密度增加,烧结后制品密度也增加,同时制品孔隙较少,晶粒尺寸分布较为均匀;集磁器锥度为45°时,压制密度及制品密度最高。
|
|
In this research,low-voltage electromagnetic compaction is used to compact TiO_(2)powders in the indirect way.After success in making high-density TiO_(2)products by the low-voltage electromagnetic compaction,the effects of coil and field shaper structure on the pressed density and product density have been investigated.If other processing parameters remain constant,the results have shown that,the pressed density and sintered product density increases with the turn number of coil increases,simultaneously,the pore space of product decreases and the grain size of product tends to uniform.In addition,the highest density of pressed parts and products is reached when the taper of field shaper is designed to 45°.
|
|
基金项目：
|
|
国家自然科学基金资助项目(50375114);;
塑性成形模拟及模具技术国家重点实验室资助项目(05-03)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]贺峻.陶瓷粉末冷等静压成形密度缺陷模拟分析[J〗.粉末冶金技术,2001,19(6):340.
[2]黄培云.粉末冶金原理[M],北京:冶金工业出版社,1982.
[3]Blazynski T Z.Explosive welding forming and compaction[M].London:Application Science Publishers Ltd.,1983.
[4]Williams J D.Explosive compaction of RSR aluminum powderat queen's university,belfast[J].Powder Metallurgy,1986,29(2):91.
[5]Clyens S,Jonson W.The dynamic compaction of powderedmaterials[J].material science engineering,1977,30:121
[6]Clyens S.Dynamic compaction of metal powders[D].Man-chester:UMIST,1979.
[7]Davies T J,Al-Hassani S T S.Advances in materials technol-ogy in the americas[J].ASME,1980(2):147.
[8]Al-Hassani S T S.Shock waves and high strain-rate phenom-ena in metals[M].New York:Plenum,1981.
[11]Peter B.Z.An electromagnetic pulse actuator[P].EP0293257,US,1988.
[12]Zeive,Peter B Z.Low voltage electromagnetic riveter[D].Washington:University of Washington,1986.
[13]Hartman J.Development of the handheld low voltage electromag-netic riveter[J].SAE Transactions,1990,99(1):2371.
[14]Hartman J,Brown T.Integration and qualification of theHH500 hand operated electromagnetic riveting system on the747 section 11[J].SAE Transactions,1993,102:2371.
[15]曹增强,盛熙,夏力农,等.低电压电磁铆接[J],航空制造技术,2000,(2):20.
[16]黄尚宇,常志华,田贞武,等.粉末低电压电磁压制实验研究[J].塑性工程学报,2001,8(3):10
[17]Wu Yanchun,Huang Shanyu,Chang Zhihua,et al..Low-voltage electromagnetic compaction of powder materials[J].Jounal of Wuhan University of Technology(Material ScienceEdition),2002,17(4):39.
[18]Huang Shangyu,Meng Zhenghua,Li Youcheng,et al..In-vestigation on the density uniformity of pressed parts by low-voltage electromagnetic compaction[J].Acta MetallurgicaSinica(English letters),2004,17(6):805.
[19]Huang Shangyu,Wu Yanchun,Zhang Qifei et al.Simulation oflow-voltage electromagnetic compaction process of powder materials[J].Key Engineering Materials,2003,249:489.
[20]黄尚宇,陈堰波,李友成,等.功能陶瓷低电压放电压制成形方法[P].CN200410013314.1,中国,2005.
[21]黄尚宇,常志华,王立峰等.板坯电磁成型载荷计算方法及分布特性[J].中国有色金属学报,1998,8(3):441.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
