|
摘要：
|
|
机匣体是枪械上的一个关键零件,其质量对枪械的整体性能有着非常重要的影响。机匣体的材料为LC4超硬铝合金,该合金的塑性差,变形流动阻力大,且具有速度敏感性。对机匣体锻件的结构特点及相对尺寸关系进行了分析,指出多向模锻是成形该锻件的优选工艺方案。制定了多向模锻工艺方案,设计了辊锻毛坯和多向模锻模具,并采用DEFORM-3D对终锻成形过程进行了数值模拟,分析了变形过程及温度场的变化规律。根据模拟结果进行了工艺试验,最后得到了合格的样件。证明了采用该工艺方案可以很好地保证成形温度,提高材料塑性,解决其成形困难的问题,同时也证明数值模拟的正确性。
|
|
The case is a key part of the shooter,whose quality has a very important effect on the shooter's integrated performance.The case material is super-hard Al-alloy LC4,which has a bad plastic property,great flow resistance and velocity sensitivity.The design feature and correlation size relation of the case forging was analyzed and multi-way die forging process was decided.Blank shape and multi-way forging dies were designed.The final forging process was simulated by DEFORM-3D program and the variation of temperature field of the billet during forming was analyzed.According to the simulation result,the experiment was taken and qualified forging was obtained.The results prove that the employed process can efficiently ensure the forming temperature,increase plasticity and solve the forming difficulty of the material. The correctness of FEM simulation is also affirmed.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]傅沛福.辊锻理论与工艺[M].长春:吉林人民出版社,1982.
[2]李尚健.金属塑性成形过程模拟[M].北京:机械工业出版社,1999.
[3]夏巨谌,韩凤麟,赵一平.中国模具设计大典(第4卷)[M].南昌:江西科学技术出版社,2003.
[4]盛永华,王新云,夏巨谌.7475铝合金高温高应变速率压缩变形的流变应力[J].锻压装备与制造技术,2005,(4):1-3.
[5]林高用,张辉,郭武超,等.7075铝合金热压缩变形流变应力[J].中国有色金属学报,2001,11(3):1-2.
[6]张小明,张廷杰,田锋,等.多向锻造对改善7075铝合金性能的作用[J].稀有金属材料与工程,2003,32(5):1-3.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
