|
摘要：
|
|
结合齿轮浮动凹模锻造和分流锻造技术,提出了一模两击式直齿轮冷闭式镦挤新技术,即先进行环形坯料带活动芯轴的镦挤预锻,后进行无芯轴空心分流终锻的两步成形工艺。并通过DEFORM—3D数值模拟分析和比较,验证了该技术能解决成形力过大和齿形充不满等缺陷,是适用于直齿圆柱齿轮精锻的有效工艺方案。
|
|
According to the floating-die forging and divided flow method for spur gear,a new technology of cold closed upsetting-extrusion process was introduced.In this new technology,the ring type of workpiece was preformed with the mandrel and forged finally using hollow divided flow method.The 3D rigid-plastic FEM results show that this new technology can solve the forming limitations,such as excessive deformation force and unsuccessful filling about tooth profile,and that it is an effective forging process for spur gears.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]张驰.闭塞锻造的发展概况及其应用[J].锻压技术,2004,29(3):7-10.
[2]杨慎华.伞齿轮冷闭塞锻造成形过程数值仿真[J].农业机械学报,2003,3(2):117-119.
[3]辛选荣,刘汀,池勇.缓冲齿轮精密冷锻工艺及模具[J].锻压技术,2003,28(1):14-15.
[4]上海交通大学《冷挤压技术》编写组.冷挤压技术[M].上海:上海人民出版社,1976.
[5]陈泽中,包忠诩,连书勤,等.直齿圆柱齿轮精锻技术的研究进展[J].金属成形工艺,1999,17(5):1-2.
[6]Choi J,Cho H Y,Jo C Y.An upper-bound analysis for theforging of spur gears[J].Journal of Materials ProcessionTechnology,2000,104(8):67-73.
[7]Chitkara N R.Near net shape gorging of spur gear forms:ananalysis and some experiments[J].International Journal ofMechanical Sciences,1996,38(8):891-916.
[8]Walters J,Wu W T,Arvind A.Recent development ofprocess simulation for industrial application[J].MaterialsProcessing Technology,2000,98:205-211.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
