锻压技术

卷曲式JCOE钢管成形芯轴直径和开口量的计算方法

英文标题：Method of deciding mandril diameter and forming gap for coiled-type of JCOE steel pipe

作者：刘庆才陈淑荣

单位：番禺珠江钢管有限公司研发中心富菱达电梯有限公司工艺部广东番禺511450 广东番禺511450

关键词：直缝焊管 JCOE 芯轴直径回弹

分类号：TG305

出版年,卷(期):页码：2007,32(2):45-46

摘要：

通过对卷曲式JCOE制管过程芯轴卷曲成形时钢板回弹量的理论分析计算,提出了根据回弹量确定成形芯轴直径的方法,所得方法对卷曲式JCOE钢管的成形工艺具有指导意义。

By theoretically analyzing and calculating spring back during pipe forming by the coiled-type JCOE process,a method based on spring back was submitted to decide the diameter of mandril.The acquired method has a directive meaning for manufacturing the coiled-type of JCOE steel pipe.

基金项目：

参考文献：

[1]顾朴,郑芳怀,谢惠玲.材料力学[M].北京:高等教育出版社,1985.
[2]肖景容,姜奎华.冲压工艺学[M].北京:机械工业出版社,2002.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】