|
摘要：
|
|
回弹是金属板料冲压中的主要缺陷之一,它可以通过修正模具形状加以解决。基于对经过成形——回弹的有限元数值模拟,提出一种循环位移补偿回弹修正模具型面的方法。它基于对经过成形——回弹有限元数值模拟得到的成形工件与目标工件多次循环比较,用成形工件结点回弹位移修正实验模具形状,直到利用修正的模具能够获得满意的工件为止。利用此方法对一小型三维铝合金板料冲压工件的冲压模具设计过程进行了数值模拟,结果表明,通过两次修正的模具可获得满意工件。并根据模拟得到的型面制作模具进行了实冲实验,证明此补偿回弹的模具修正法是有效的。
|
|
Part shape error due to springback is one of most important manufacturing defect in sheet metal stamping process.This problem can be corrected by using appropriate designs of the die shape.A new method for designing sheet forming dies was introduced.It was based on iteratively comparing a target part shape with the finite element simulated part shape following forming and springback.The displacement at each node was used to adjust the trial die design until the target part shape was achieved.The proposed method was demonstrated for one case of forming a simple three dimensional part with an aluminum alloy sheet.The result of the numerical investigation indicates that the designed dies are found to produce the target part shape with very small error only through twice adjusting process.The corresponding experiment was carried out.The results show that the designed tools obtained by repeated displace compensating method can produce the desired part shapes with small error.
|
|
基金项目：
|
|
国家自然科学基金资助项目(50305031);;
华中科技大学塑性成形模拟及模具技术国家重点实验室开放基金资助项目(04-04);;
河北省教育厅科研项目(05-04);;
燕山大学博士基金资助项目(06-9)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]Webb R D,Hardt D E.A transfer function description ofsheet metal forming for process control[J].Trans.ASMEJournal of Engineering for Industry,1991,33(2):44-52.
[2]Gan W,Wagoner R H.Die design method for sheet spring-back[J].International Journal of Mechanical Sciences,2004,46:1097-1113.
[3]王昶,何玉林,胡亚民,等.轿车车身覆盖件冲压模具工艺补充面设计与应用[J].锻压技术,2006,31(5):100-103.
[4]Barlat F,Daniel J L,John C B.A six-component yield func-tion for anisotropic materials[J].Int.J.of Plasticity,1991,7:693-712.
[5]Chu E,Shah K N,Pourboghrat F.The development/applica-tion of sheet metal forming technology at Alcoa[J].SAETrans of Materials&Manufacturing,1993,No.930523:743-755.
[6]林忠钦,李淑慧,于忠奇,等.车身覆盖件冲压成形仿真[M].北京:机械工业出版社,2004.
[7]于开平,周传月,谭惠丰.Hypermesh从入门到精通[M].北京:科学出版社,2005.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
