网站首页期刊简介编委会过刊目录投稿指南广告合作征订与发行联系我们English
定位偏心轴冷温挤压成形工艺及模具
英文标题:Forming process and dies of cold and warm extrusion for location eccentric shaft
作者:张水忠 徐新成 赵中华  
单位:上海工程技术大学材料工程学院 上海工程技术大学材料工程学院 上海工程技术大学材料工程学院 上海201620 上海201620 上海201620 
关键词:偏心轴  冷挤压  温挤压  挤压模具 
分类号:TG376.3
出版年,卷(期):页码:2008,33(1):81-84
摘要:
分析了定位偏心轴的形状特点,针对冷、温挤压各自的特点,采用两者相结合的成形工艺方案。制定了零件挤压成形图,确定了挤压工艺路线。校核了各道挤压工序的变形程度,同时介绍了冷温挤压模具。指出对于一些尺寸精度高、变形程度较大的零件,可采用冷、温挤压相结合的工艺进行成形;同时,在温挤压前,要预先合理地分配材料,以保证零件充分成形。考虑到坯料在温挤压时受到多种因素的影响,可采用冷推挤工序来确保零件关键部位的尺寸精度。
The forming characteristics of the location eccentric shaft was analyzed.According to the characteristics of cold and warm extrusion,the forming technology plan combining cold with warm extrusion was adopted.The extrusion forming drawing was made and the extrusion procedure route was confirmed.The deformation degree of each extrusion procedure was checked.The cold and warm extrusion dies were introduced.The conclusion is that the forming technology combined cold with warm extrusion can be used for the parts with high dimension precision and large deformation degree.Meanwhile,before warm extrusion,it must prearrange material rationally so as to guarantee the full forming of the part.Considering the blank was influenced by many factors during warm extrusion,the cold push-extrusion procedure can be adopted for assuring the high dimension precision of key positions of the part.
基金项目:
上海市重点学科建设资助项目(J51402);; 上海工程技术大学校重点学科资助项目(No.xk0705)
作者简介:
参考文献:
[1]孟令先,宋学进,张元国,等.汽车启动齿轮的高效成形方法[J].锻压技术,2005,30(1):13-22.
[2]朱志伟,梁继才,李义,等.轿车等速万向节星形套闭塞模锻成形技术研究[J].锻压技术,2005,30(6):7-10.
[3]钱荣芳.精密齿轮的冷挤压成形[J].锻压技术,2005,30(2):73-76.
[4]贾俐俐.挤压工艺及模具[M].北京;机械工业出版社,2004.
[5]张峥嵘,肖红生,尹平,等.冷、温精锻综合成形关键技术及其发展趋势[J].锻压设备与制造技术,2004,39(5):19-22.
[6]肖红生,吴兵,张峥嵘,等.温锻-冷精整综合成形技术及其应用[J].机械工人(热加工),2003,45(6):12-14.
[7]洪深泽主编.挤压工艺及模具设计[M].北京:机械工业出版社,1996.
服务与反馈:
本网站尚未开通全文下载服务】【加入收藏
《锻压技术》编辑部版权所有

中国机械工业联合会主管 北京机电研究所有限公司 中国机械工程学会塑性工程分会主办
联系地址:北京市海淀区学清路18号 邮编:100083
电话:+86-010-82415085 传真:+86-010-62920652
E-mail: fst@263.net(稿件) dyjsjournal@163.com(广告)
京ICP备07007000号-9