|
摘要：
|
|
等通道转角挤压技术是一种有效细化材料的微观组织的新工艺。本文选择通道转角、挤压速度、润滑条件、变形温度等4个工艺参数为变量,根据选定的正交试验表对9组不同参数组合方案进行单道次挤压试验,通过极差分析,获得了4个参数中影响2A50铝合金晶粒细化程度的先后顺序,同时找出了影响晶粒细化的主要因素,提出了一个较优化的水平组合方案,为后续的多道次工艺试验提供了科学的依据。
|
|
Equal channel angular extrusion is an advanced technology that can refine the microstructure of materials.Nine sets of experiments were carried out for 2A50 aluminum alloys according to selected orthogonal experiment scheme during the single-path equal channel angular extrusion.Four main process parameters were given in the experiments,including channel angle,extrusion speed,lubrication condition and forming temperature.The influence sequence of the above four parameters on the grain-refining were obtained and the optimum scheme was put forward by a range analysis to grain size,which offered the scientific reference for multi-path experiments.
|
|
基金项目：
|
|
江西省教育厅科学技术研究项目资助(DB200701053)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]王乐安.难变形合金锻件生产技术[M].北京:国防工业出版社,2005
[2]Segal V M,Reunion V I,Drobyshevkiy A E,et al.Plasticmetal working by simple shear[J].Russ Metally,1981,(1):99-104.
[3]刘先兰,胡治流.等径角挤压模具对超细晶材料显微组织的影响[J].模具制造,2006,(1):54-59.
[4]Kamchi M,Furukawa M.A model investigation of theshearing characteristics in equal channel angular pressing[J].Mater.Sci.Eng.,2002,A347(1):223-230.
[5]Shin H D,Pak J J,Kim Y K.Effect of pressing temperatureon microstructure and tensile behavior of low carbon steelsprocessed by equal channel angular pressing[J].Mater.Sci.Eng.,2002,A325(1):31-37.
[6]Segal V M.Materials processing by simple shear[J].Materi-als Science and Engineering,1995,197(2):157-164.
[7]白朴存,聂浩,田春雨,等.等通道转角多道次挤压有限元模拟[J].锻压技术,2007,32(5):125-128.
[8]金良超.正交设计与多指标分析[M].北京:中国铁道出版社,1988.
[9]胡德林.金属学及热处理[M].西安:西北工业大学出版社,1995.
[10]陈刚,彭晓东,范培耕,等.等通道转角挤压工艺参数对铝镁合金组织和性能的影响[J].轻金属,2007,(1):54-57.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
