|
摘要：
|
|
针对摩托车后挡泥板成形过程中容易起皱和拉裂的问题,采用塑性有限元法,利用Dynaform模拟分析软件,对摩托车的后挡泥板成形过程及影响其成形质量的两个主要工艺参数——压边面的形状和尺寸、拉深筋的高度进行了模拟和优化,得到了压边面形状和尺寸、拉深筋高度分布的优化工艺参数。有效地避免了摩托车后挡泥板在成形过程中的起皱和拉裂,获得了合格的零件。
|
|
Aiming at the problem that motorcycle back fender tends to be crinkled and cracked during the forming process,the plastic finite element method and Dynaform software were employed to simulate the forming process and optimize its two primary process parameters of figure and size of press border surface and heights of drawbead.The optimized shape and size of press border surface and drawbead height distributon were got.The motorcycle behind fender's crinkles and cracks were effectively avoided to have the qualified parts.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]郭华英,金淼.板料在半圆形拉深筋中的变形研究[J].锻压技术,2006,31(6):29-32.
[2]杨曼云,孙希平,胡忠勇.汽车覆盖件成形数值模拟过程及影响因素研究[J].模具技术,2006,(1):3-7.
[3]Zienkiewicz O C.The Finite Element Method[M].Londen:Third Edition,McGRAN-HILL,1977.
[4]Kobayashi S,Oh S I,Altan T.Metal Forming and the FiniteElement Method[M].New York:Oxford UniversityPress,1989.
[5]Schmidit H,Vu T C,Reckr L.Sheet forming simulation-thebreakthrough of a new technology[A].Proceedings of theThird International Conference[C].新加坡:NUMISHEET 96,1996.
[6]王孝培.冲压手册[M].北京:机械工业出版社,2000.
[7]王玉国,卫原平,沈启,等.覆盖件拉深模工艺补充部分和压料面设计[J].上海交通大学学报,1999,33(2):184-187.
[8]王伟,施法中.覆盖件拉延模型工艺补充部分的参数化设计[J].锻压技术,2007,32(2):105-109.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
