|
摘要：
|
|
通过对U型弯曲件的工艺分析,合理设计了落料、弯曲复合模,即在一个工位完成切舌、弯曲、切断3个不同工序的复合模结构。介绍了该模具的工作过程及设计要点。经实际生产验证,产品质量、生产效率和经济效益均得到了不同程度的提高。在考虑模具结构及成本的前提下,提高了复合模及连续模在模具生产中的占有比例,符合模具设计的发展方向。
|
|
By analyzing bending parts of U type,the blanking and bending compound dies which could complete synchronously 3 procedures of lancing,bending and cutting-off in the same working station were designed reasonably.The die working process and main design points were introduced.After the actual production,it was found that the product quality,production efficiency and economic efficiency were improved for some extent.The percentage of coumpound die and progressive die in the die production was increased by considering the die structure and cost,which shall meet the die design development requirement.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]聂福荣,黄彩霞,王帆.冲模设计与制造技术的发展现状及前景[J].模具技术,2005,(4):60-63.
[2]虞传宝.冷冲压及塑料成型工艺及模具设计资料[M].北京:机械工业出版社,1992.
[3]姜奎华.冲压工艺与模具设计[M].北京:机械工业出版社,1997.
[4]官英平,王凤琴,赵军.宽板V型自由弯曲智能化控制过程的影响因素分析[J].模具工业,2005,(3):35-36.
[5]刘波,黄晓艳,陈炜绝.缘外壳切断打弯模设计.模具技术,2006,(6):15-17.
[6]许发樾.实用模具设计与制造手册[M].北京:机械工业出版社,2000.
[7]王军,傅?,庞炜.U型弯曲支撑件冲模设计[J].模具技术,2006,(4):17-20.
[8]聂福荣,张思成,邢志华,等.弹性反向弯曲模设计[J].模具工业,2004,(6):20-22.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
