|
摘要：
|
|
针对AZ91D镁合金,采用Gleeble1500D热模拟实验机对原始铸态试样在不同温度和应变速率下的高温压缩变形行为进行了实验研究。结果表明,AZ91D镁合金在压缩温度为200℃时,随着应变速率增大,应力升高加快;压缩温度为300~400℃、应变速率为0.001~1 s-1时,材料呈现出稳态流变的特性;当应变速率提高到5 s-1时,未出现稳态流变现象。建立了AZ91D镁合金低、高温压缩的变形力学模型,其结果可为镁合金的塑性成形工艺的制订提供理论依据。
|
|
The high temperature compression test to the original casting sample of AZ91D magnesium alloy was carried out on the Gleeble1500 thermal simulation testing machine under the different temperatures and the strain rates.The results show that when compression temperature is 200 ℃,the stress increases more rapidly with the strain rate getting greater;when compression temperature is 300-400 ℃ and the strain rate is 0.001-1 s-1,the material shows the steady flowing behavior and there is no obvious peak stress;even though strain is greater than 0.6,there is no crack,and strain rate reaches to 5 s-1,there is no sign of steady flowing behavior.Based upon the test results,the mathematics models of deformation on low and high temperatures were established,and its result might provide a more scientific basis for plastic forming of AZ91D magnesium alloy.
|
|
基金项目：
|
|
国家自然科学基金资助项目(50605059);;
山西省青年科学基金资助项目(2007021026)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]Li Shubo,Gan Weimin,Zheng Mingyi,et al.Microstruc-ture evolution of SiC_w/AZ91 magnesium matrix compositeduring high temperature compression[J].Transactions of Non-ferrous Metals Society of China,2005,15(S2):245-250.
[2]Yuan G Y,Sun Y S,Dngw J.Effects of Sb addition on themicro structure and mechanical properties of AZ91 magnesi-um alloy[J].Scripta Mater.,2000,43(11):1009-1013.
[3]Yamada Y,Shimojima K,Saka Guchiy,et al.Effects of heattreatment on compressive properties of AZ91 Mg and SG91AAl foams with open-cell structure[J].Materials Science andEngineering A,2000,280(1):225-228.
[4]李淑波,邹志文,吴昆,等.AZ91D镁合金高温压缩过程中的微观组织演变[J].中国有色金属学报,2007,17(7):1041-1046.
[5]李旭斌,张治民,杜战峰.变形镁合金零件数值模拟及成形工艺优化设计[J].锻压技术,2007,32(2):130-133.
[6]徐华阳,张志豪,谢建新.AZ91镁合金齿轮类精密零件超塑性模锻成形研究[J].塑性工程学报,2007,14(1):58-61.
[7]夏华,刘艳雄,赖周艺,等.AZ61A镁合金的镦粗压缩试验[J].锻压技术,2007,32(2):4-6.
[8]咸奎峰,张辉,陈振华.AZ31镁合金板温拉深流变应力行为研究[J].锻压技术,2006,31(3):46-49.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
