锻压技术

压力机与开关磁阻电机刚性传动的连接分析

英文标题：Analysis of rigid transmission connection between press and switched reluctance motor

作者：赵婷婷王浩

关键词：压力机开关磁阻电机传动刚性连接

分类号：TG305

出版年,卷(期):页码：2009,34(4):83-85

摘要：

开关磁阻电机刚性连接压力机执行机构时有过载情况发生。在分析打击瞬时螺旋压力机螺杆扭矩的基础上,提出等强度原则,推出了电机轴侧的扭矩及过载倍数的计算公式,并给出了过载数据。提出解决过载问题的措施,是在刚性传动时增设摩擦安全联接装置,能有效避免电机轴过载。结论对开关磁阻电机驱动的压力机设计具有重要意义。

The overload cases often occurred when rigid connection was between switched reluctance motor and executing parts on the presses.On the basis of analyzing the torque of screw rods on screw press in attacking moment,the equal strength principle was put forward.The calculating formula of the torque and the overload multiple of motor shaft was derived.The overload data were given.The solution for the question about motor shaft fracture was introduced.It was explained that the additional secure friction connection could avoid overload effectively when the motor shaft was rigidly connected.The conclusion has the vital significance to the design of the press driven by switched reluctance motor.

基金项目：

山东省科技攻关项目(2007GG10004019)

参考文献：

[1]中国锻压协会秘书处.中国锻压行业未来发展方略[J].锻压技术,2003,28(1):1-2.
[2]张元良,庄云霞,邢吉柏.电动螺旋压力机的研究与发展[J].锻压装备与制造技术,2008,(1):12-14.
[3]孙友松,周先辉,黎勉,等.交流伺服压力机及其关键技术[J].锻压技术,2008,33(4):1-8.
[4]赵婷婷,贾明全.开关磁阻调速式数控螺旋压力机[J].锻压技术,2007,32(3):85-88.
[5]赵婷婷,贾明全,姜则东.新型开关磁阻伺服压力机传动系统设计[J].锻压技术,2008,33(1):130-133.
[6]赵婷婷,贾明全.螺旋压力机的传动及其数控比较研究[J].机械传动,2007,31(4):85-86.
[7]赵婷婷,贾明全.开关磁阻调速数控成形设备方案与设计[J].制造技术与机床,2007,(3):72-74.
[8]韩林源,黄宝丽,董志坤.电动螺旋压力机结构特点及性能分析[J].机械工程师,2007,(2):108-109.
[9]赵润华.国产新型电动螺旋压力机[J].锻造与冲压,2008,(2):85-86.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】