锻压技术

镁合金射钉枪端盖等温体积成形的数值模拟

英文标题：Simulation of magnesium alloy isothermal bulk forming for nail gunshot machine cover

作者：王昶徐惠娟李春天胡亚民

关键词：射钉枪端盖等温体积成形挤压 DEFORM-3D 数值模拟镁合金AZ31D

分类号：TG371

出版年,卷(期):页码：2009,34(3):10-13

摘要：

针对射钉枪端盖零件,设计了等温挤压成形工艺和等温挤压试验模具。利用DEFORM-3D对成形过程进行数值模拟,预测了射钉枪端盖零件成形力为90kN以及成形过程分为5个阶段。采用YAW-500kN微机控制电液伺服压力试验机进行挤压试验,试验证明所设计的成形方案合理可行,同时也验证了数值模拟分析的正确性。

The techniques of isothermal extrusion and isothermal extrusion mould were designed for the part of nail gunshot machine cover . The deformation process was simulated with finite element method software DEFORM-3D. The predicted force of deformation for the part of nail gunshot machine cover was 90 kN, and the deformation process was divided into five phases. The isothermal extrusion was processed by the pressure machine YAW-500kN. The project of deformation and the correctness of simulation analysis were verified by the process experiment.

基金项目：

重庆市自然科学基金资助项目(CSTC2006BB4398)

参考文献：

[1]曹荣昌,何伟,徐永波,等.Mg合金的最新进展及应用前景[J].金属学报,2001,51(1):2-13.
[2]余琨,攀文献,李松瑞,等.变形镁合金材料的研究进展[J].轻合金加工技术,2001,29(7):6-11.
[3]夏华,刘艳雄,赖周艺,等.AZ61A镁合金的镦粗压缩试验[J].锻压技术,2007,32(2):4-6.
[4]贾宪安,胡九锡.热挤压工艺与模具设计[M].北京:机械工业出版社,1986.
[5]杨长顺.冷挤压模具设计[M].北京:国防工业出版社,1994.
[6]Hu Yamin,Lai Zhouyi,Zhang Yucheng.The study of cup-rod combined extrusion processes of magnesiumalloy(AZ61)[J].Journal of Material Processing Technology,2007,(12):649-652.
[7]中国机械工程学会中国模具设计大典编委会.中国模具设计大典:4卷[M].南昌:江西科学技术出版社,2003.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】