|
摘要：
|
|
百万千瓦核反应堆中汽轮机低压转子锻件是目前世界上所需制造的最大锻件,需采用600t级钢锭直接锻造成形。根据成形特点和需要,采用物理模拟的方法,研究了FM法锻造成形工艺,建议采用砧宽比为0.6左右,压下率为15%。FM法压下时试件表面存在产生裂纹的倾向,合理选择凸型砧角度可减弱表面裂纹的产生,角度选择8°左右效果较好。研究了拔长时坯料形状及多工序连砧拔长的影响作用,为最终生产工艺的制定提供理论指导。
|
|
The low-pressure turbine rotor in 1000 MW-class nuclear power plant is presently the largest forging in the world. It should be forged by ingot of 600 t. According to the rotor's forming specialty,its forging process using FM method was studied by physical modeling. W/H ratio about 0.6 and reduction ratio as 15% were suggested. Cracks on billet's surface were revealed. Proper angle about 8° of protuberant anvil to reduce crack impact,billet shape and multi-path drawing process were researched. The results provide a theoretical guidance for practical manufacture process.
|
|
基金项目：
|
|
“十一五”国家科技支撑计划重点项目课题(2007BAF02B07)
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]张国宝.努力打造大型铸锻件生产基地[J].装备制造,2008,(4):48-51.
[2]李尚健.金属塑性成形过程模拟[M].北京:机械工业出版社,1999.
[3]马庆贤,曹起骧,钟约先.大型锻件的模拟技术及内部质量控制研究[J].中国机械工程,1999,10(9):1021-1023.
[4]中国机械工程学会锻压学会.锻压手册[M].北京:机械工业出版社,2002.
[5]赵文奇,谢冰,曹起骧.模拟热钢塑性变形的非金属软材料及若干实验技术[J].力学与实践,1997,19(2):52-54.
[6]王连生,董仕深.塑性泥在模拟热钢塑性成形中的应用[J].装备环境工程,1992,(2):63-66.
[7]陈森灿,孙世济,鲍钢.铅试件镦粗模拟实验技术[J].装备环境工程,1987,(4):32-36.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
