|
单元可组合式管子冲孔模具设计
|
|
英文标题：Pipe hole punching die of combined unit type |
|
作者：张福乐 |
|
单位：开封联合收割机厂 |
|
关键词：管子冲孔 单元式模具 组合模具 |
|
分类号：TG385.2 |
|
出版年,卷(期):页码：2009,34(4):120-122 |
|
摘要：
|
|
论述了管子冲孔工艺不同形式的特点和难点,分析了管子冲孔过程中的受力情况以及对管子变形的影响,提出了管子冲孔夹紧及反向预变形的必要性和设计方法,以及单元可组合式管子冲孔模具结构的设计及关键零件的制造。该模具结构简单、制造成本低、组装方便快速灵活;具有适用多品种、准备周期短的优越性及适用范围,该模具大大拓宽了现有管子冲孔工艺范围和模具的适用能力。
|
|
The characteristics and difficulties of the different styles for pipe hole punching technology were described.The forcing situation during the process of pipe hole punching and its effect on the pipe distortion were analysed.The necessity and design methods of the pipe hole punching,clampping and possible reverse distortion were explained.The units combination of the designing structure of pipe hole punching and the key parts manufacturing were introduced.Many advantages,such as simple structure,low manufacturing cost,easy assemble,suitability for many kinds of items,short lead time and wider applications were also introduced.By using the die,the application range of pipe hole punching process was expanded and the adaptability of the die was enhanced.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]冷压冲模设计编写组.冷压冲模设计[M].北京:第四机械工业部标准化研究所出版,1981.
[2]冲模设计手册编写组.冲模设计手册[M].北京:机械工业出版社,2003.
[3]朱旭霞.冲压工艺及模具设计[M].北京:机械工业出版社,2008.
[4]侯义謦.冲压工艺及模具设计[M].北京:兵器工业出版社,1994.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
