|
16000kN卧式双动挤压机活动横梁修理
|
|
英文标题：Active beam repair of 16000kN horizontal double-action extruding press |
|
作者：杨国义 |
|
单位：河南江河机械有限责任公司 |
|
关键词：挤压机 活动横梁 断裂 焊接修理 |
|
分类号：TG375 |
|
出版年,卷(期):页码：2010,35(1):168-170 |
|
摘要：
|
|
挤压机活动横梁下部发生断裂并产生裂缝,丧失功能需进行修理。采用自制的、具有锁紧装置的液压顶紧装置将其复位后,在裂缝上面、下面和侧面分别采用二氧化碳气体保护焊和直流弧焊的方法进行焊接。采用焊前预热、焊中保温、焊后低温回火和每焊一层后振动打击的方法消除焊接应力。焊接修理后恢复了活动横梁的功能,经过几年的使用证明,满足压机的功能要求。
|
|
Fracture cracks are generated at the bottom beam of extruding press,which losses its functions and needs to be repaired.Being repositioned with home-made self-locking hydraulic puller device,the carbon dioxide gas arc welding and DC arc welding were made on the top,bottom and side parts of the fracturing crack.The warm-up before welding,heat holding during welding,low temperature tempering after welding and vibrating and hitting operation after every welding layer were used to eliminate the welding stress.After welding repair,active beam function was restored.It proves that it can meet the requirement of the extruding press through the application experiences for several years.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
[1]中国机械工程学会焊接学会著.焊接手册:第1卷焊接方法及设备[M].北京:机械工业出版社,2001.
[2]中国机械工程学会焊接学会著.焊接手册:第2卷材料的焊接[M].北京:机械工业出版社,2001.
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
