|
摘要：
|
|
根据上限原理，建立了一种适用于分析锥形凹模内挤压／拉拔过程的新的上限模型。该模型覆盖了速度间断面的母线为直线的所有情况。通过适当的数值计算方法和最优化方法，利用该模型可以揭示主要工艺参数对锥形凹模内挤压／拉拔过程的影响，并可考虑加工硬化及死区的形成。
|
|
A new upper bound model is proposed for extrusion/drawing processes through conical die. The proposed model according to upper bound approach covers all of the situations in which the entry and exit boundaries of deformation zone are assumed to be conical. The influences of the process parameters on the extrusion/drawing processes through conical die are revealed by using the model through the proper numarical methods and minimization technique. The forming of the dead zone and work-hardening can be taken into consideration by the model presented in the paper.
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
1 B Avitzur. Metal Forming: Processes and Analysis.Robert E. Krieger Publishing Co, Huntingtion New York,1979.
2BAVitzuu.Limit Analysis in Metal Forming-AppliCa-tion to the Flow tnrough Conical Converging Dies, Manufac-turing Solutions Based on Engineering Sciences.Proc.of theWinter Annual Meeting of the ASME,ed.L.Kops,Wash-ington, D. C, November 15-20, 1981, pp 167-197
3 ManuelJM Barata Marques, Paulo A F Martins andIorge M C Rodrigues. Hot Forging of Shells: An UpperBound Approach .J. of Mater,, Proc.Tech.Vol 21, 1990,PP.65-73。
4罗子健等编著.金属塑性成形原理.西安:西北工业大学出版社,1989·
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
