网站首页期刊简介编委会过刊目录投稿指南广告合作征订与发行联系我们English
双螺杆式气门校正机的结构特点与应用
英文标题:Structure feature and application of twin\|screw\|stem valve leveler
作者:潘振鹏 刘伟国 李芬 罗天友 莫东强 黄祖明 
单位:广东工业大学 广东杯集汽车配件厂 
关键词:螺杆 气门 校正机 
分类号:TG385.5
出版年,卷(期):页码:1999,24(3):0-0
摘要:
扼要地介绍双螺杆式气门校正机的机械结构,分析气门受力和校直原理,讨论三个校正工艺参数,即气门中心降低量Δ,两螺杆最近工作距离Δ1和液压滑台工作压力P对校正质量和效率的影响,探讨螺杆锥度结构的作用,最后用批量生产试验说明机器校正相对人工校直的优缺点
The article introduces mainly about the mechanical structure of twin\|screw\|stem valve leveler,analyzes stress of the valve and the alignment principle,and discusses about effect of three alignment technical parameter(lowering amount of the valve center,closest distance for two opposed stems,operating pressure of the hydraulic sliding table) on alignment quality and efficiency.And also discusses effect of taper structure of the stem.Finally,explains the difference between mechanical alignment and artificial alignment by pilot production in volume.
基金项目:
作者简介:
参考文献:
1王秀伦.螺纹滚压加工技术.北京:中国铁道出版社.1990:17~22,145~148,167~1942刘鸿文主编.材料力学.北京:高等教育出版社.1991:138~160,236~239
服务与反馈:
本网站尚未开通全文下载服务】【加入收藏
《锻压技术》编辑部版权所有

中国机械工业联合会主管 北京机电研究所有限公司 中国机械工程学会塑性工程分会主办
联系地址:北京市海淀区学清路18号 邮编:100083
电话:+86-010-82415085 传真:+86-010-62920652
E-mail: fst@263.net(稿件) dyjsjournal@163.com(广告)
京ICP备07007000号-9