|
摘要：
|
|
介绍了挤压模体可轴向振动挤压成形新技术国内外最新进展 ,并以圆柱齿轮闭塞挤压成形为例 ,说明了挤压模体可轴向振动挤压成形新技术的成形机理及其发展前景
|
|
In this paper,the development of new technology about extrusion with axial oscillation container in our country and overseas is introduced,and through an example about forming a spline gear by closetype forging,the forming mechanism and the development prospect of extrusion with axial oscillation container is introduced
|
|
基金项目：
|
|
|
|
作者简介：
|
|
|
|
参考文献：
|
1 X Wang.Development of precision forging processes with axiallyDriven container.Osaka University,1997.
2 K Kohdo,T Sakusai.Precision cold die forging of an internalhelical gear by divided flow method.The processings of the 47thJapanesejoint conference for the technology of plasticity,1996 :87～ 88
3 K Osakada,S Hanami,X Wang.Precision closed die forging ofspline with axially driven container,.The processings of the47thJapanese joint conference for the technology of plasticity,1995 :2 5 5～ 2 5 6
4 小坂田宏造 ,花见真司 ,王欣 .コンテナを驱动すゐ锻造加工研究 .第 5回中日精密锻造シソポヅウム论文集 ,1996 :89～ 92
5 E Dorge,R Bohnsack,C Romanowski.Tool technologies for nearnet shape forgings.International conference on forging and relatedtechnology ICFT 98:311～ 32 1
6 李洪波 ,高新 ,吕玫 .圆柱直齿轮精锻成形的 UBEI数值模拟 .金属成形工艺 ,1996 (3) :2 1～ 2 3
7 江雄心 ,林治平 .带毂直齿圆柱齿轮精锻的计算机模拟 .金属成形工艺 ,1997(2 ) :
8 谭险峰 ,林治平 .带毂直齿圆柱齿轮精锻的变形分析 .金属成形工艺 .1998(1) :31～ 32 ,46
9 孟令光 ,张燮昌 ,宋学进 .汽车起动机导筒渐开线内花键冷挤成形工艺研究 .第 5回中日精密锻造シソポヅウム论文集 ,1996 :36～40
10 马兰 ,张质良 ,卢国纲 .汽车起动齿轮冷挤压过程金属流动规律研究 ,锻压技术 ,1997,2 2 (1) :9～ 11
11 林治平 ,陶泽球等 .直齿圆柱齿轮精锻工艺方案的研究。锻压技术 ,1999,2 4(2 ) :9～ 12 ,17
|
|
服务与反馈：
|
|
【本网站尚未开通全文下载服务】【加入收藏】
|
|
|
|
