网站首页期刊简介编委会过刊目录投稿指南广告合作征订与发行联系我们English
基于混合包络矩形的复杂轮廓激光切割路径规划
英文标题:Laser cutting path planning of complex contour based on mixed envelope rectangle
作者:林砺宗 李明智 
单位:华东理工大学 
关键词:复杂轮廓 激光切割 切割路径 多工艺约束 包络矩形 遗传算法 
分类号:TH164
出版年,卷(期):页码:2020,45(4):147-153
摘要:

 复杂轮廓的钣金激光切割路径规划是集成化激光切割系统中的关键问题之一,在依次优先满足嵌套图形先内后外的顺序切割、空走行程不经过已切割区域、尽可能不跨区域切割的工艺要求下,建立以路径规划时间和空走行程最短为目标的优化模型。在规划算法设计和实现上,首先对复杂轮廓进行预处理,计算每个轮廓的最小外接包络矩形;然后,利用遗传算法、复杂轮廓原边界角点与包络矩形边界角点的位置关系,进行激光切割路径的初步和精细规划;最后,通过该算法实现对钣金切割案例的精细路径规划,规划结果表明,该算法具有规划速度快、规划路径短和算法稳定性高的特点。

 The planning of laser cutting path for sheet metal with complex contour is one of the key problems in integrated laser cutting system. Under the technological requirements of sequential cutting from inside to outside for nested graphics, vaconcy route without through the cutting areas and avoided cutting across the regions as far as possible, an optimization model aiming at the shortest time of path planning and the shortest vacancy route was established. In the design and implementation of the planning algorithm, firstly, the complex contours were pre-processed, and the minimum circumscribed envelope rectangle of each contour was calculated. Then, the laser cutting path was preliminarily and precisely planned by using the genetic algorithm and the position relationship between the original boundary corner points of complex contours and the boundary corner points of envelope rectangle. Finally, the precise path planning of the cutting case for sheet metal was realized by this algorithm. Planning results show that this algorithm has the characteristics of fast planning speed, short planning path and high stability.

基金项目:
作者简介:
林砺宗(1961-),男,博士,教授 E-mail:2638572202@qq.com
参考文献:

 [1]周济. 智能制造—“中国制造2025”的主攻方向[J]. 中国机械工程, 2015, 26(17):2273-2284.


Zhou J. Intelligent manufacturing-“Made in China 2025” main direction[J]. China Mechanical Engineering, 2015, 26 (17): 2273-2284.

[2]刘山和,钱晓明,楼佩煌. 基于遗传蚁群混合算法的激光切割机路径优化[J]. 机械制造与自动化, 2016,(6):92-95.

Liu S H, Qian X M, Lou P H. Path optimization of laser cutting machine based on genetic ant colony algorithm [J]. Machinery Manufacturing and Automation, 2016, (6): 92-95.

[3]吴晨, 杜忠泽, 朱晓雅. 工艺参数对CVCE变形工业纯铝组织和性能的影响[J]. 稀有金属, 2018,42(11):110-115.

Wu C, Du Z Z, Zhu X Y. Effect of process parameters on Microstructure and properties of CVCE deformed industrial pure aluminum [J]. Chinese Journal of Rare Metals, 2018,42 (11): 110-115.

[4]刘绅绅. 基于蚁群算法的激光切割工艺路径优化研究[J]. 锻压技术,2019,44(5):16-18.

Liu S S. Research on path optimization of laser cutting technology based on ant colony algorithm [J].Forging & Stamping Technology,2019, 44(5):16-18.

[5]王凌. 智能优化算法及其应用[M]. 北京:国防工业出版社,2004.

Wang L. Intelligent Optimization Algorithm and Its Application [M]. Beijing: National Defense Industry Press,2004.

[6]罗宏博. 一般位置直线与一般位置平面相交可见性判断方法的研究[J]. 陇东学院学报, 2014,25(1):25-26.

Luo H B. Research on the method of judging the visibility of the intersection of general position straight line and general position plane[J]. Journal of Longdong University, 2014, 25(1): 25-26.

[7]李满枝, 王凯华, 王洪涛,等. 遗传算法模拟生物多序列比对之初始化的改进[J]. 辽宁工程技术大学学报:自然科学版, 2017,36(6):104-109.

Li M Z, Wang K H, Wang H T,et al. Improvement of genetic algorithm to simulate the initialization of biological multi-sequence alignment [J]. Journal of Liaoning University of Engineering and Technology: Natural Science, 2017, 36(6): 104-109.

[8]潘海鸿, 刘晓琳, 廖小平, 等. 钣金激光切割加工CAD/CAM软件的孔群加工路径优化算法[J]. 组合机床与自动化加工技术, 2013,(11):110-113.

Pan H H, Liu X L, Liao X P,et al. Optimization algorithm of hole group processing path for laser cutting CAD/CAM software [J]. Combination Machine Tools and Automatic Processing Technology, 2013, (11): 110-113.

[9]王馨. 平面内可相交直线序列的遍历算法研究[D]. 大连:大连海事大学, 2015.

Wang X. Ergodic Algorithm for Intersecting Linear Sequences in Plane[D]. Dalian: Dalian Maritime University, 2015.

[10]金芬, 孙春华, 钟鸣. 遗传算法中适应度函数的改进术[J]. 机械设计与制造, 2010,(3):218-219.

Jin F, Sun C H, Zhong M. Improvement of fitness function in genetic algorithm[J]. Mechanical Design and Manufacturing, 2010, (3): 218-219.

[11]陈焱, 吴明慧. 遗传算法的研究[J]. 金卡工程, 2009, 13(9):233.

Chen Y, Wu M H. Research on genetic algorithms[J]. Golden Card Project, 2009, 13 (9): 233.

[12]刘飞, 王秋莲. 机械制造系统能效评价的特点、研究现状及发展趋势[J]. 中国机械工程, 2013,24(11):1550-1556.

Liu F, Wang Q L. Characteristics, research status and development trend of energy efficiency evaluation of mechanical manufacturing systems [J]. China Mechanical Engineering, 2013, 24 (11): 1550-1556.

 
服务与反馈:
文章下载】【加入收藏
《锻压技术》编辑部版权所有

中国机械工业联合会主管  中国机械总院集团北京机电研究所有限公司 中国机械工程学会主办
联系地址:北京市海淀区学清路18号 邮编:100083
电话:+86-010-82415085 传真:+86-010-62920652
E-mail: fst@263.net(稿件) dyjsjournal@163.com(广告)
京ICP备07007000号-9