锻压技术

新型轴承钢的始锻和终锻温度优化

英文标题：Optimization on initial and final forging temperature for new type bearing steel

作者：李磊应纪来

分类号：TG146.2

出版年,卷(期):页码：2018,43(6):10-14

摘要：

为优化锻造工艺以提高新型含锶轴承钢的性能和使用寿命，采用不同的始锻温度和终锻温度进行了新型含锶轴承钢的锻造成形，并进行了耐磨损性能和热疲劳性能的测试与分析。试验结果表明：随始锻温度从1120 ℃增加至1240 ℃、终锻温度从900 ℃增加至975 ℃，新型含锶轴承钢的耐磨损性能和热疲劳性能呈现先增强后弱化的变化趋势。适当增加锻造温度可提高轴承钢试样的耐磨损性能，磨痕的宽度和深度均变浅，磨损量变小，还能阻碍裂纹的萌生和发展。从提高新型含锶轴承钢试样的耐磨损性能和热疲劳性能出发，其锻压工艺优选始锻温度为1180 ℃、终锻温度为950 ℃。

In order to improve the performance and service life of bearing steel containing Sr, a new type bearing steel containing Sr was forged under different initial and final forging temperatures, and the testing and analyses of wear resistance and thermal fatigue properties were carried out. The experimental results show that with the increasing of initial forging temperature from 1120 ℃ to 1240 ℃, the final forging temperature increases from 900 ℃ to 975 ℃, and the wear resistance property and thermal fatigue property of the new type bearing steel containing Sr show the tendency of strengthening first and then weakening. Therefore, the suitable increase of the forging temperature can improve the wear resistance property of bearing steel specimens, and the width and depth of the abrasion become shallow. Thus, the wear quantity devreases, and the initiation and propagation of the crack can be hindered. From the view point of improving the wear resistance and thermal fatigue properties of new type bearing steel containing Sr, the initial forging temperature of 1180 ℃ and the final forging temperature of 950 ℃ are the most preferred forging process.

基金项目：

河南省高等教育教学改革研究项目（2014SJGLX467）

李磊（1978-），硕士，副教授；Email：3354088055@qq.com

参考文献：

［1］宋永奇, 何杉, 李进, 等.轴承疲劳故障试验机的设计与测试
［J］. 徐州工程学院学报, 2015, 30(1):82-84.

Song Y Q, He S, Li J, et al. A bearing fatigue fault testing machine: design and test
［J］. Journal of Xuzhou Institute of Technology, 2015, 30(1):82-84.

［2］田超, 刘剑辉, 董瀚. 进口与国产轴承钢夹杂物特征的对比研究
［J］. 热加工工艺, 2017, 46(24):58-62.

Tian C, Liu J H, Dong H. Comparative study on inclusions characteristic of imported and domestic bearing steel
［J］. Hot Working Technology, 2017, 46(24):58-62.

［3］宋华华, 刘汇河, 李付伟, 等. 含氮不锈轴承钢的孪晶碳化物及其对性能的影响
［J］.轴承, 2014, (12):31-33.

Song H H, Liu H H, Li F W, et al. Twin carbide and its effect on mechanical properties of 40Cr15Mo2VN bearing steel
［J］. Bearing, 2014, (12):31-33.

［4］孙艳坤, 张威. 高温变形后冷却工艺对高碳铬轴承钢组织和性能的影响
［J］. 热加工工艺, 2017, 46(8):100-103.

Sun Y K, Zhang W. Effect of cooling process on microstructure and property of high-carbon chromium bearing steel after hot deformation
［J］. Hot Working Technology, 2017, 46(8):100-103.

［5］郎荣兴, 李贵全, 殷春云. 0Cr17Ni4Cu4Nb钢锻造裂纹分析与控制
［J］. 锻压技术, 2016, 41(9):18-22.

Lang R X, Li G Q, Yin C Y. Analysis and control on forging cracks of steel 0Cr17Ni4Cu4Nb
［J］. Forging & Stamping Technology, 2016, 41(9):18-22.

［6］何加群. 中国强国战略和轴承产业
［J］. 轴承, 2015, (1):55-63.

He J Q. China′s industrial power strategy and bearing industry
［J］. Bearing, 2015, (1):55-63.

［7］张伟, 夏高宇, 王强, 等. 转向轴承套圈温锻成形工艺的有限元模拟
［J］. 锻压技术, 2016, 41(12):14-25.

Zhang W, Xia G Y, Wang Q, et al. Finite element analysis on warm forging process for steering bearing rings
［J］. Forging & Stamping Technology, 2016, 41(12):14-25.

［8］梁若, 庞思勤, 程冠华, 等. 34CrNiMo6钢复合喷丸强化的有限元模拟
［J］. 航空制造技术, 2017, 60(10):99-103.

Liang R, Pang S Q, Cheng G H, et al. Finite element simulation of 34CrNiMo6 steel after dual shot peening
［J］. Aeronautical Manufacturing Technology, 2017, 60(10):99-103.

［9］GB/T 15824—2008，热作模具钢热疲劳试验方法
［S］.

GB/T 15824—2008, Thermal fatigue testing method for hot die steel
［S］.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】