锻压技术

工艺参数对双层304不锈钢波纹管液压胀形回弹的影响

英文标题：Effect of process parameters on springback of bilayered 304 stainless steel bellows in hydroforming

作者：刘静王有龙李兰云李霄

分类号：TG386.43

出版年,卷(期):页码：2017,42(6):71-76

摘要：

工艺参数对双层波纹管液压胀形回弹有重要影响。为提高波纹管成形的精度，基于ABAQUS平台，对双层波纹管液压胀形及回弹过程进行仿真分析，研究了内压力、模具行程和挤压速度对不同膨胀比波纹管回弹后的长度、波高和波厚的影响。结果表明，内压力和模具行程增大时，波纹管长度变化量、波高变化量和波厚变化量均基本呈线性增大趋势，且长度和波厚的变化量远大于波高变化量；内压力对回弹的影响大于模具行程的影响；回弹量对工艺参数的敏感性随膨胀比的增大而增大。对于膨胀比为1.47的波纹管，内压力增大150%时，波纹管长度、波高和波厚变化量分别增大了119%，175%和167%。模具行程增大20%时，波纹管长度、波高和波厚变化量分别增大了26%，18%和29%。

There is a significant influence of process parameters on the springback of bilayered 304 stainless steel bellows in hydroforming. To improve the forming quality, the hydroforming process and springback process of bilayered bellows were numerically simulated by ABAQUS platform, and the influences of internal pressure, die stroke and feeding rate on changes of bellow length, wave height and wave thickness after springback were investigated. The results show that with the increase of internal pressure and die stroke,the changes of bellow length, wave height and wave thickness increase linearly, and the changes of bellow length and wave thickness are larger than that of wave height. Furthermore, the influence of internal pressure on springback is larger than that of die stroke, and the sensitivity of springback on process parameters increases with the increase of expansion ratio. For bellow with expansion ratio of 1.47, the changes of bellow length, wave height and wave thickness increase by 119%, 175% and 167% respectively when the internal pressure increases up to 150%. While the die stroke increases up to 20%, they increase by 26%, 18% and 29% respectively.

基金项目：

国家自然科学基金资助项目（51405386）；陕西省自然科学基础研究计划项目(2014JQ7237)；陕西省教育厅专项科研计划项目(14JK1565)；凝固技术国家重点实验室（西北工业大学）开放课题 (SKLSP201403)；西安石油大学青年科研创新团队资助项目(2015QNKYCXTD02)

刘静（1983-），女，博士，讲师

参考文献：

［1］徐开先. 波纹管类组件的制造及其应用[M]. 北京：机械工业出版社，1998.

Xu K X. Manufacturing and Application of Bellow Components[M]. Beijing: China Machine Press, 1998.

［2］苑世剑，何祝斌，刘钢，等. 内高压成形理论与技术的新进展[J]. 中国有色金属学报，2011，21(10)：2523-2533.

Yuan S J, He Z B, Liu G, et al. New developments in theory and processes of internal high pressure forming[J]. The Chinese Journal of Nonferrous Metals, 2011, 21(10): 2523-2533.

［3］张大林，黄乃宁，张文良，等. 大口径阀门用精密金属波纹管成形工艺[J]. 阀门，2014， (2)：13-15, 31.

Zhang D L，Huang N N，Zhang W L, et al. Forming process of large-diameter precision metal bellows for valves[J]. Valve, 2014, (2): 13-15, 31.

［4］郎利辉，王永铭，段新民，等. 复杂薄壁微小截面环形件的充液成形技术研究[J]. 锻压技术，2011，36 (2)：34-38.

Lang L H, Wang Y M, Duan X M, et al. Research on multi-step hydroforming of complicated thin wall circular part with small section[J]. Forging & Stamping Technology, 2011, 36 (2): 34-38.

［5］赵长财，刘助柏. 金属波纹管液压胀形工艺过程中的管坯长度计算[J]. 锻压技术,2001，26(5)：32-33.

Zhao C C, Liu Z B. Blank length calculating of bellows hydraulic shaping[J]. Forging & Stamping Technology, 2001,26(5): 32-33.

［6］黄志勇，陈伟，陈勇，等. 波纹管液压成形及其仿真中问题研究[J]. 压力容器，2002，(Zl): 137-140.

Huang Z Y, Chen W, Chen Y, et al. Bellow hydroaulic forming and its simulation research[J]. Pressure Vessel Technology, 2002, (Zl): 137-140.

［7］孙贺，钱才富，叶梦思，等. 波纹管液压成形的数值模拟研究[A]. 第十四届全国膨胀节学术会议论文集-膨胀节技术进展[C]. 合肥，2016.

Sun H, Qian C F, Ye M S, et al. Numerical simulation of metallic bellows hydroforming[A]. Proceedings of the 14th Expansion Joint Meeting-Expansion Joint Technology Progress[C]. Hefei, 2016.

［8］彭赫力，张小龙，李中权，等. 波纹管液压成形数值模拟和实验[J]. 航天制造技术，2015，(2)：23-25，30.

Peng H L, Zhang X L, Li Z Q, et al. Numerical simulation and experiment of bellows hydroforming[J]. Aerospace Manufacturing Technology, 2015, (2): 23-25, 30.

［9］夏彬. 中小直径波纹管内压成形技术的研究[D]. 哈尔滨：哈尔滨工业大学，2011.

Xia B. Research on the Hydroforming Technology of Small Diameter Bellows[D]. Harbin: Harbin Institute of Technology, 2011.

［10］刘静，王有龙，李兰云，等. 多层U形不锈钢波纹管液压胀形仿真分析[A]. 第十四届全国膨胀节学术会议论文集-膨胀节技术进展[C]. 合肥，2016.

Liu J, Wang Y L, Li L Y, et al. FE simulation of multilayered Ushaped stainless steel bellows in hydroforming [A]. Proceedings of the 14th Expansion Joint Meeting-Expansion Joint Technology Progress[C]. Hefei, 2016.

［11］Lee S W. Study on the forming parameters of the metal bellows[J]. Journal of Materials Processing Technology, 2002, 130-131(11):47-53.

［12］Faraji G, Mashhadi M M, Norouzifard V. Evaluation of effective parameters in metal bellows forming process[J]. Journal of Materials Processing Technology, 2009, 209(7): 3431-3437.

［13］刘静，黄卫良，李霄，等. 单双层U形不锈钢波纹管液压胀形变形特征对比研究[J]. 锻压技术，2016，41(5)：24-28.

Liu J, Huang W L, Li X, et al. Deformation behavior of single and bi-layered U-shaped stainless steel bellows in hydroforming[J]. Forging & Stamping Technology, 2016, 41(5): 24-28.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】